|
| Tocchi |
|
|||
|
happened today in Subi... going around a corner at 20kmh... felt a massive bang... and suddenly there was my front right wheel rolling away from the car...
the wheel nuts stripped themselves.... luckily the hub adaptor took the brunt of the impact (so my actual hub is ok  )
and the front 1/4 panel is rooted... also, my brake rotor has a slight flat spot the rim is all good though 
i ended up chucking the FTRs back on... and using 'race' tape to hold it back on... ive been able to source a heritage green 1/4 panel so thats good. and the 1/4 panel was the only damage this is why hub adaptors are dangerous! |
|||
| Top | |
|||
| twase |
|
|||
|
Ouch, we should make this thread a sticky for the frequent hub adapter debates.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| voids |
|
|||
|
i think you should contact the manufacturer of the hub adaptors and report what happend, maybe this item needs to be recalled. just lucky it happend at low speed. its i real safety hazard if it happens at high speed.
_________________ '96 DF II LTD 6cy |
|||
| Top | |
|||
| Froudey |
|
||
|
{USERNAME} wrote: Ouch, we should make this thread a sticky for the frequent hub adapter debates.
yeap............ so by the looks of it you need a new guard.... repeater light and new rotor.... (i wouldn't be using that one looks like it is a bit grinded (might be the photos though)) you all right no whiplash or anything could of been worse 90km or some down a high way not good........
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Tocchi |
|
|||
|
ive sorted out a guard... i need a new bulb (i found the repeater
 it got flicked off the panel )
yeh thats why im annoyed but happy it didnt happen on the freeway (which i pretty much got off 2mins beforehand) |
|||
| Top | |
|||
| blackjack_original |
|
||
Posts: 3516 Joined: 8th Nov 2004 |
[self-deleted]
Last edited by blackjack_original on Sat Jun 07, 2014 12:56 am, edited 1 time in total. |
||
| Top | |
||
| shannonwulff |
|
|||
|
jesus...lucky is wasnt going down the freeway at 100 man...hope it dosent cost too much to fix.
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| fourL6 |
|
|||
|
if any one wonts those rims... nows the time to make a offer lol... bad luck man...
_________________ Was - {DESCRIPTION} |
|||
| Top | |
|||
| hans hartman |
|
||
|
{USERNAME} wrote: happened today in Subi... going around a corner at 20kmh... felt a massive bang... and suddenly there was my front right wheel rolling away from the car... looking at studs,they where mild steel -ford use better grade steel and or heat treat -to harden the threads.
the wheel nuts stripped themselves.... luckily the hub adaptor took the brunt of the impact (so my actual hub is ok )and the front 1/4 panel is rooted... also, my brake rotor has a slight flat spot the rim is all good though i ended up chucking the FTRs back on... and using 'race' tape to hold it back on... ive been able to source a heritage green 1/4 panel so thats good. and the 1/4 panel was the only damage this is why hub adaptors are dangerous!
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| fnp |
|
|||
Age: 39 Posts: 4401 Joined: 25th Mar 2005 Ride: BA XT, BA XR6T, ED Ghia 5.0 Location: Perth |
Good to hear your ok there.. reminds me of when the same thing happened on top gear to their reasonably priced car
_________________ What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep.. |
|||
| Top | |
|||
| Tocchi |
|
|||
|
{USERNAME} wrote: That's interesting. What brand/type of adaptors are those? What metal did they use? How much did you pay for them, where did you get them? The metal would have to be really weak for the strippage to occur just like that. Are you sure someone didn't try to steal your wheels but only managed to loosen the nuts. im not sure what brand... but it seems the body is aluminium... i got them for $75 each... im not gonna say where i got them due to defamation laws. nah cos the other side (left front) had loose nuts too (including locknut)... dodgy!!!! {USERNAME} wrote: jesus...lucky is wasnt going down the freeway at 100 man...hope it dosent cost too much to fix. only front 1/4 panel damage... nothing else... so cheap fix {USERNAME} wrote: if any one wonts those rims... nows the time to make a offer lol... bad luck man...
haha nope if anything ill chuck em on the parents F6
and thanks for the concern guys
|
|||
| Top | |
|||
| phongus |
|
|||
|
damn man...good to hear all is good. Dodgy hub adapters. I agree with hans hartman...looks like mild steel considering the bend...if it was quenched and the studs gave way...the thing could have snapped off.
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| ELGT |
|
|||
|
For 5 1/2 x 20tpi studs to strip, a fairy must have kissed you on the d**k.
I dont mean to speak wrong or anything, but engineering wise, its an impossibility, as the thread is stronger over its surface area than the alloy holding the studs in. I would say, purely from an engineering point, that seeing your other front was not tight, that you may have had some clearance issues with the wheel and it (or both) were not put on correctly, or not tightened. Hub adaptors are a factory fitment on Porches, F350 front wheels etc. For 5 studs to all strip simultaneously, its a mechanical impossibility. |
|||
| Top | |
|||
| millsy81 |
|
||
|
seems that way..
Could have been a dud set.
_________________ Bog Stock Au fairmont Ghia |
||
| Top | |
||
| ELGT |
|
|||
|
Actually, looking at the pics closer, I would bet by left gonad that the wheel nuts were left loose. The stud shows no sign of yeilding, and thread looks fairly intact.
Did you check for correct wheel nuts, and that they were seating correctly, and not bottoming out? |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
