|
| ea_falcon |
|
||
|
hey guys i brought a lsd either out of a eb xr8 or eb xr6 i think its series one. will it be a straight swap in to my ea falcon series 2?
also how do i tell what ratio the gears are? couldnt find them on the tag
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| KWIKXR |
|
|||
|
Just the LSD centre or the complete diff disc to disc? I dont see why it shouldnt, pretty sure they are all the same.
If its the complete diff pull the cover off the back of the housing and have a look at the ring gear/crownwheel. It should have the ratio stamped on there somewhere along with a few other numbers etc. |
|||
| Top | |
|||
| ea_falcon |
|
||
|
i am going to change it disc to disc i will change the disc's to non abs discs though
ok cool cheers mate i thought is would have been stamped some were on the out side or the numbers on the tags or diff mean something
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| cjh |
|
|||
|
EB series 1 were usually 3.27:1.
You can fit the EB diff in wholus-bolus, but you'll need to make spacers to fit the rear lower arms into the diff. I did this with puting in an EBII diff into my EA.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| ea_falcon |
|
||
|
yes that was the main query i had with the lower control arms could i just change them with eb control arms because im not confidant in making spacers and don't trust my self lol
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 99 guests |
