Using Voxace's guide for the resistors on the automatic wiring loom to trick the auto ECU when running a manual gearbox.

The wire colours given are (page 23):
Light Brown with Red Stripe
Solid Yellow
Solid Violet
Purple with Green Stripe

I do not have 2 of these - I only have Solid Violet/purple and Solid Yellow (my yellow does have 2 red dots continuously down it, but I don't think this matters). Is there a different colour on the EF for the other 2?

The 6.8k resistor needs to be attached between the Violet and Purple-Green wires.
The 1.2k resistor needs to be attached between the Light Brown-Red wire and the Yellow wire.