|
| bennywabbit94 |
|
||
|
Hi guys I've done my brake booster and lost my vacuum in the brakes and sucks to push it in. What's involved in changing the brake booster? Any help muchly appreciated.
Cheers Ben |
||
| Top | |
||
| Esteven8 |
|
|||
|
{DESCRIPTION} is for EF/L, but I imagine it would be the same for the XH.
_________________ {USERNAME} wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. {DESCRIPTION} {DESCRIPTION} |
|||
| Top | |
|||
| sooty72 |
|
|||
|
Yes - same as EF/EL.
Beware - they are made of plastic, so DON'T over tighten the bolts, or it will fail again. If your careful you can replace the booster without disconnecting the lines from the master cylinder. Good luck. 
_________________ Yes, I own a Ute. No, I won't help you move! |
|||
| Top | |
|||
| bennywabbit94 |
|
||
|
Have just put my booster in and now brake lights aren't working, is there anything I can do?
Regards Ben |
||
| Top | |
||
| Esteven8 |
|
|||
|
{USERNAME} wrote: Have just put my booster in and now brake lights aren't working, is there anything I can do? Regards Ben Recheck the brake light switch isn't loose. They are a really touchy P.O.S. If still no joy, you will need to replace it.
_________________ {USERNAME} wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. {DESCRIPTION} {DESCRIPTION} |
|||
| Top | |
|||
| SWC |
|
||
|
Did you install your brake switch properly?
|
||
| Top | |
||
| TROYMAN |
|
||
|
thread moved to "gearbox, suspension. BRAKE & driveline workshop...
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: falcon_dave, Google Adsense [Bot] and 35 guests |
