|
| Drapes54 |
|
||
|
Gday i was wondering whats the best way to get seriously good handling out of a V8 Xh ute its currently lowered on 2" blocks but want to get them reset eventually whats the best way do you reckon?
|
||
| Top | |
||
| voids |
|
|||
|
I would say a decent suspension package including shock and springs, something that's matched to vehicles weight pretty well.
also good tyres help wouldn't go anything lower profile than a 17" as its still leaf sprung and will be too rough.
_________________ '96 DF II LTD 6cy |
|||
| Top | |
|||
| Drapes54 |
|
||
|
Its currently got lowering blocks with 17s on it and stock front suspension would the ultimate best package be getting the rear springs reset and getting coil overs for the front to keep it driveable and reliable?
|
||
| Top | |
||
| sooty72 |
|
|||
|
Just remember, it is a Ute, and you have to allow for a few shortcomings with the handling, especially in the rear. That being said, they can still be made to turn and stop ok.
Mine has 2" blocks in the rear, and lowered Kings in the front - can't remember which ones - with 17 x 8's, with 235/45's all round, and it (when the tyres aren't old and hard  ) doesn't handle too bad. But I grew up with leaf-sprung Falcons, and don't mind the way they handle. You just have to remember, your not driving a BMW 5-series, and if you get too excited, the rear will come around and slap you. Or the scenery.  I have chased down many smaller, supposedly-better handling cars through some twisty bits, and always come out with a big grin. As always, leaf spring cars are meant to be a slow in / power out-style of driving. If you try to carry too much corner speed, you will run out of talent real quick. But seriously, if you want something that handles real well, it wont be a Ute... 
_________________ Yes, I own a Ute. No, I won't help you move! |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Thicker front swaybar and the addition of a rear swaybar - IMO best noticeable change you can make.
gearbox-suspension-brake-driveline-f4/whiteline-swaybar-for-ef-xr6-wagon-t122623.html You should have already a limited slip diff to help the rear keep reasonable traction.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Drapes54 |
|
||
|
yea i got 17x8s on it at the moment soon will have 17x8.5 on it with 235/45 tyres on it they grip reasonably well but i have noticed they lose traction extremely easily and the ute as i found out the other day driving through an underground parking lot gets sideways without any trouble at all complete accident haha
|
||
| Top | |
||
| Drapes54 |
|
||
|
what exactly do trailing arms do is it worthwhile putting some in and do the sway bars bolt in or is there welding required?
|
||
| Top | |
||
| snap0964 |
|
|||
|
post1290900.html
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Drapes54 |
|
||
|
what exactly do trailing arms do is it worthwhile putting some in and do the sway bars bolt in or is there welding required?
|
||
| Top | |
||
| snap0964 |
|
|||
|
{USERNAME} wrote: http://www.fordmods.com/post1290900.html
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Drapes54 |
|
||
|
is it worth while working out how to put trailing arms in and will they do much??
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 62 guests |
