|
| Drapes54 |
|
||
|
Gday,
i cant seem to find much out about this we are looking at converting my xh v8 ute to a manual and cant find a v8 t5 anywhere i can get my hands on a t5 for a good price out of an xr6 will this t5 work with the v8?? if not whats the differences between the xr6 t5 and a v8 t5? if so what will be required to make it all work properly? will i need a manual computer or can i use a j3 chip? T5 bellhousing flywheel clutch clutch cable pedal box will i need anything else? |
||
| Top | |
||
| Mad2 |
|
|||
|
V8 has a differant input shaft [length].
|
|||
| Top | |
|||
| Drapes54 |
|
||
|
ok so the only 6 cylinder thing i can use is the pedal box?
|
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: ok so the only 6 cylinder thing i can use is the pedal box? for a layman ... like me .... yes [bellhousing won't, input shaft won't & no idea re flywheel] think the 6/8 ratios are differant as well, someone will mention what tho & unsure re cable length. i have EA-ED, EF-EL as well as AU cables and there are differant lengths for the 6 depending on model.. |
|||
| Top | |
|||
| Drapes54 |
|
||
|
what exactly will i need for the conversion?
i know i need the following bellhousing clutch clutch cable T5 gearbox flywheel pedal box and a j3 anything else or is that it? |
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: what exactly will i need for the conversion? i know i need the following bellhousing clutch clutch cable T5 gearbox flywheel pedal box and a j3 anything else or is that it? presume it's like changing the 6 from auto to manual .... so i'd say that's about right 
|
|||
| Top | |
|||
| Drapes54 |
|
||
|
sweet now the challange of finding some of these
|
||
| Top | |
||
| Drapes54 |
|
||
|
is the manual tailshaft the same length as an auto?
|
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: is the manual tailshaft the same length as an auto? EA to EL .. yes AU to FG ... no so remember the AU & up gearbox is roughly 2 inches longer in length than the e series box. |
|||
| Top | |
|||
| Drapes54 |
|
||
|
i have managed tosource a t5 out of an au xr8 are they the same length as an e series or all the manual au boxes longer?
|
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: i have managed to source a t5 out of an au xr8 are they the same length as an e series or all the manual au boxes longer? my understanding is longer. to see this yourself, measure the gearboxes from output end to bellhousing engine mounts. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 41 guests |
