|
| znipa-x |
|
|||
|
being the capable aircraft technician / diesel fitter that I am, last time I changed the shocks on the EF myself, prick of a job needing spring compressors etc, but not that hard, this time I thought I might be lazy and get it done for me, having moved up the ladder and not being used to getting my hands dirty to much anymore, don't bloody think so, JAX tires quoted approx 1day
 and $800 (parts & labour)  to do the job, might have to give the local mechanic a go.
_________________ former FORD V8 owner |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
thats not to shabby mate
new shocks will set u back around $400 and then springs... was quoted 1k to lower my au with konis and lovel springs
_________________ RIP SCOTT |
|||
| Top | |
|||
| znipa-x |
|
|||
|
{USERNAME} wrote: thats not to shabby mate
new shocks will set u back around $400 and then springs... was quoted 1k to lower my au with konis and lovel springs not doing springs, this is mearly replacing worn out shocks.
_________________ former FORD V8 owner |
|||
| Top | |
|||
| Seannyb |
|
||
|
Thats a bucket load.
Whats the go with these spring compressors, i bought a pair to lower my ed over xmas, and i didnt need em at all... Id say do em yourself, fronts can be changes over at about .5 to 1 hour and rears prolly an hour total. All you need is 2-3 jacks and your set, its all so much easier if you jack both sides up at once, both front wheels then both rear, cause swaybars make it difficult.
_________________ Car Killer. |
||
| Top | |
||
| twr7cx |
|
|||
|
{USERNAME} wrote: Whats the go with these spring compressors, i bought a pair to lower my ed over xmas, and i didnt need em at all...
How'd you squish the springs down then so that you could tighten the tops? |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
springs were probably flogged already and possibly more in need of being reset than compressed, I have done rears before without compressors.. little interesting but can be done.. spring compressors make it alot easier and safer.. spend the $$$ is you want someone else to do it.. BTW what shocks were they gonna use? and bare in mind you will be paying hoist time and labour.. still sounds on the high side but depending on parts used it could still be ok..
_________________
|
|||
| Top | |
|||
| Steady ED |
|
|||
|
You dont need compressors for the rear.
I don't know how you would need to 
Even if you have some monster giant raised springs, just drop the watts link and let the diff down further. Only need compressors in the front to put springs back in, depending on if you've got shortened struts and what springs. Depending on shocks, $800 could be good or bad! Local guy might be better, but I'd just man up and do it myself 
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
ok just shcoks is a rip off
shop around man and see if u can get new springs as well 
it is easy to do with some mechanical knowlage and the correct tools, if u dont think u can do it safely DONT do it simple!
_________________ RIP SCOTT |
|||
| Top | |
|||
| Private9 |
|
|||
|
{USERNAME} wrote: You dont need compressors for the rear.
I don't know how you would need to Even if you have some monster giant raised springs, just drop the watts link and let the diff down further. Only need compressors in the front to put springs back in, depending on if you've got shortened struts and what springs. Depending on shocks, $800 could be good or bad! Local guy might be better, but I'd just man up and do it myself I've got to pull rear springs out of a car I'm wrecking and had just assumed I'd need compressors! Given that it's got ultra lows fitted, perhaps they're already fairly short and will come out pretty easily! |
|||
| Top | |
|||
| fiftyone |
|
|||
|
you can get a set of monro gas GT's on ebay for $300 and postage. onlineperformance he's called
_________________ ** For Sale ** {DESCRIPTION} |
|||
| Top | |
|||
| prydey |
|
|||
|
{USERNAME} wrote: I've got to pull rear springs out of a car I'm wrecking and had just assumed I'd need compressors!
Given that it's got ultra lows fitted, perhaps they're already fairly short and will come out pretty easily! ultra's should fall out as soon as you jack up the rear.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
