|
| fastleno |
|
|||
|
i have been trying to get my sisters eb started after it just stopped on the side of the road , it has plenty of spark but wont fire, i pulled off the fuel line and the fuel pump seems to be doing its thing, i think its a fuel problem but what, any ideas ??
|
|||
| Top | |
|||
| philaddis |
|
|||
|
If you have spark and fuel pressure to the rail, I'd be looking at the injectors and the injector pulse as probable candidates.
_________________ ED XR8 Spri-mitatio-nt |
|||
| Top | |
|||
| fastleno |
|
|||
|
would a shagged fuel regulator cause this if so would clamping the discharge of the fuel regulator prove the regulator is stuffed
? |
|||
| Top | |
|||
| EL__Fairmont |
|
|||
|
Even with a stuffed FPR the car should still start and hunt at idle. If your getting good blue spark while cranking on a test plug and/or you can hear the fuel pump prime in the boot when ign is turned on. Then it's got to be the ECU relay under the coolant reservoir that controls voltage to the injectors or the ECU has packed it in.
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| fastleno |
|
|||
|
thanks mate i will have a look at em
|
|||
| Top | |
|||
| low_ryda |
|
|||
|
doesn't the ecu control spark to though ?
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| fastleno |
|
|||
|
spark amongst other stuff, anyways its not fuel pump, ecu relay, f/p relay, module, fuses, smartlock jewel is doing what its ment to so i dont think its a security issue what else could stop the injectors from working.
|
|||
| Top | |
|||
| EL__Fairmont |
|
|||
|
fastleno wrote: spark amongst other stuff, anyways its not fuel pump, ecu relay, f/p relay, module, fuses, smartlock jewel is doing what its ment to so i dont think its a security issue what else could stop the injectors from working. So you have already put a 12v test bulb across one of the injector plugs while cranking the engine and it didn't flash at you. Well then you have a faulty connection between the MPI harness plug to the ECU relay( which you have tested for 12v output while cranking the engine)... Just use your multimeter and start measuring for continuity through the harness.. Cheers....
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 85 guests |
