|
| Olive Xm |
|
|||
|
Dose anyone know what pressure AU falcon and AU XR6 and AU VCT run?
When you buy a new reg do you have to get the fuel rail to? |
|||
| Top | |
|||
| Olive Xm |
|
|||
|
Bump
Also are the injectors the same??? |
|||
| Top | |
|||
| MY.93.ED |
|
||
|
the standard AU motors have 270 kpa fuel pressure regulator, XR's and VCT run a 300kpa reg i think, i know the EF/EL XR6s do.
_________________ Silver EB Fairmont- AU S3 engine, Tickford Head, EF handbrake, T5 manual, EF XR6 3.45 LSD, 2.5" Catback by Rapid Exhaust, EL BBM, EL XR6 ECU, EL Thermos, EB Ghia interior, Kingy Superlows, Monroe struts |
||
| Top | |
||
| twr7cx |
|
|||
|
MY.93.ED wrote: the standard AU motors have 270 kpa fuel pressure regulator, XR's and VCT run a 300kpa reg i think, i know the EF/EL XR6s do. This is correct. XR6 and VCT engines both use the higher pressure regulator. From my experience of the AU fuel rails, and it was some time ago that I installed an AU XR6 rail into my EF, the fuel pressure regulator is built onto the fuel rail, and not easily removable like the EF/L ones (which remove when you undo the 2 bolts). I think, and this I'm not overly sure about, the injectors have a different plug on them. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 41 guests |
