|
| falcon1999 |
|
|||
|
Does anyone know how to remove the inner fender to get to the antenna assembly?
Do we need to take off the mud flap?
_________________ What do you call a Hyundai with dual exhausts? |
|||
| Top | |
|||
| fiftyone |
|
|||
|
fordmods-technical-documents-diy-f38/antenna-removal-t32593.html
bit of info in there
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| alfy |
|
|||
|
basically, taking the inner guard liner off is the way to go. mudflap off, and theres a few scrivets and bolts holding the guard liner in. and theyre an absolute a** to get out. have fun
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| falcon1999 |
|
|||
|
alfy wrote: basically, taking the inner guard liner off is the way to go. mudflap off, and theres a few scrivets and bolts holding the guard liner in. and theyre an absolute a** to get out. have fun Yes, they have Phillips crossheads on them but no matter how much you turn them, they just won't come off. Are these like the front grille bolts? Because the method that I used to take those off was to "pry" them out. What do you think?
_________________ What do you call a Hyundai with dual exhausts? |
|||
| Top | |
|||
| frankieh |
|
|||
|
get a pointy knife and a fork... thats what I've always used..
use the knife tip to lift the edge of the screw enough to get a fork tine on either side.. then just tilt the fork and out it comes... been doing it that way for long enough that my wife forced be to keep a fork and knife in the shed rather than borrowing some of hers when needed. |
|||
| Top | |
|||
| peaandham |
|
|||
|
I can tell you how to get to the antenna
go to the front left side of the car 1) Jack the car up 2) Take off the mud flap 3) Pry to plastic screws out (it will require some prying) And then you should see the antenna, i cannot help further as when i did mine it had no bracket and still doesn't so i only had to screw the new antenna in !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| Froudey |
|
||
|
peaandham wrote: I can tell you how to get to the antenna go to the front left side of the car 1) Jack the car up 2) Take off the mud flap 3) Pry to plastic screws out (it will require some prying) And then you should see the antenna, i cannot help further as when i did mine it had no bracket and still doesn't so i only had to screw the new antenna in ! This is how it is done.
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 50 guests |
