|
| twr7cx |
|
|||
|
Any tips or tricks on undoing the top bolt on the starter motor?
|
|||
| Top | |
|||
| Froudey |
|
||
|
twr7cx wrote: Any tips or tricks on undoing the top bolt on the starter motor? Two ways... Slide a long 13mm socket with long extension bars or underneath with a long extension
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| cjh |
|
|||
|
3/8" drive extensions, 13mm socket, and an 3/8" drive mini air ratchet.
On the EF's, the coil pack makes it harder to get to.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| sexyr6 |
|
|||
|
you have to do it from under the car, I use a 1/4 inch drive socket set, I use the short and long extentions. make sure you undo the top bolt first as it is much harder to undo with the bottem bolt removed first..
_________________
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
Ended up getting it not long after this post. Put a stubby spanner on, used a hammer and long thin rod to crack the bolt (2 people - 1 to hold and 1 to hit) and then life was easy.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 94 guests |
