au cam specs (is this mild or wild?)

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Page 1 of 1 [ 5 posts ]

Post New Topic Post Reply

Previous topic Next topic

FORDom

Post subject: au cam specs (is this mild or wild?)

Posted: Wed Jul 01, 2009 8:53 pm

Getting Side Ways

Offline

Posts: 1220

Joined: 11th Nov 2007

Ride: f6 rspec

Location: Sydney
NSW, Australia

I got this cam for my au motor (motore to be put in an ef with ef j3 computer) and was wondering if it would be possible to get a bigger cam ? How much more power will this cam give the motor? (the motor has exhaust mods, heads been ported etc..

duration 255 / 260
duration @ .50" cam lift 210/221
lift at cam 240/270
lobe separation angle 114

Top

Profile

racer

Post subject: Re: au cam specs (is this mild or wild?)

Posted: Thu Jul 02, 2009 5:24 pm

Tyre Shredder

Offline

Posts: 363

Joined: 16th Jul 2007

Ride: EL Falcon

Power: 146 rwkw

Location: sydney
NSW, Australia

Duration @ .050 is nice. Advitised duration a little small.
I don't get the lift. Is 240 inlet & 270 exhaust. if so lift at valves is 480 in. & 540 ex.
That is alot of differance between them.
If all that is correct my opinion is that's a mild cam going off the duration @ .050.

_________________

FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, SPR ported head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac.

Top

Profile

FORDom

Post subject: Re: au cam specs (is this mild or wild?)

Posted: Thu Jul 02, 2009 7:19 pm

Getting Side Ways

Offline

Posts: 1220

Joined: 11th Nov 2007

Ride: f6 rspec

Location: Sydney
NSW, Australia

thanks mate, its a cam from camtech and i guess ill have to leave it in the engine to see how it goes, if its too mild ill get them to regrind it into something more aggressive.

Top

Profile

racer

Post subject: Re: au cam specs (is this mild or wild?)

Posted: Thu Jul 02, 2009 11:16 pm

Tyre Shredder

Offline

Posts: 363

Joined: 16th Jul 2007

Ride: EL Falcon

Power: 146 rwkw

Location: sydney
NSW, Australia

Malcum at camtech cams is a top bloke. I know him. He will gide you in the right direction.
I think i made a mistake about the lift because the au falcon engine has a rocker ratio of 1.8 so that will make the valve lift 432 intake & 486 exhaust. & 114 lobe seperation is a very good spec for auto's.

_________________

FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, SPR ported head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac.

Top

Profile

ebxr82nv

Post subject: Re: au cam specs (is this mild or wild?)

Posted: Sun Jul 05, 2009 9:17 pm

Getting Side Ways

Offline

Age: 41

Posts: 1353

Joined: 15th Mar 2007

Gallery: 7 images

Ride: AU XR6

Power: 171 rwkw

Location: thornton
NSW, Australia

FORDom wrote:

my cam is as follows:
duration 281/284
duration@.50" 228/228
lift 275/275
lobe separation 112 in/113 ex

This produced 157rwkw untuned on a stock unopened motor with a 5sp box

_________________

9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track.
86 ZL mint grandpa spec with premo sound and 150000km
07 TTG 60000km stock as, mods to come.
97 el futura about to be MOCKed

Top

Profile

Post New Topic Reply

Page 1 of 1 [ 5 posts ]

Jump to:

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online
Users browsing this forum: No registered users and 53 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

It is currently Thu Nov 28, 2024 10:27 am

All times are UTC + 11 hours