|
| falcon1999 |
|
|||
|
This is as far as it will come out (See Photo)
Any ideas as to how I can pull the whole unit out? Attachment: image_00084.jpg [ 73.45 KiB | Viewed 157 times ] Attachment: image_00085.jpg [ 65.6 KiB | Viewed 162 times ]
_________________ What do you call a Hyundai with dual exhausts? |
|||
| Top | |
|||
| mok1275 |
|
||
|
Just remove the plastic tray that is underneath and then it should come out easy.
|
||
| Top | |
||
| falcon1999 |
|
|||
|
mok1275 wrote: Just remove the plastic tray that is underneath and then it should come out easy. Yeah I tried that, the tray wouldn't come out
_________________ What do you call a Hyundai with dual exhausts? |
|||
| Top | |
|||
| Froudey |
|
||
|
pull or jiggle it
just like ya d**k lol joke
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| happydude666 |
|
|||
Age: 34 Posts: 201 Joined: 1st Dec 2008 Ride: BAxr6 mkII, BA xr6, EA Spac Location: Melbourne |
did u try putting it back in almost the whole way then pulling out the bottom tray by slightly bending the top of it down? if that didnt work just try and yank it out just ehough to try and release the clip behind it
or u may have to find someone with girlie hands to reach up the back of it from your passenger footwell sort of where the center console joins that blob of gizmos and disconecting it before you try and yank it out. thats all i can think of right now
_________________ Homer- Everytime i try to learn somethign new it pushes out old information! |
|||
| Top | |
|||
| falcon1999 |
|
|||
|
Finally.
I yanked it out - see photo below But guess what. The unit doesn't fit. The new unit (black one) is from a V8 AU, mine is a V6 AU What now? - any ideas? The problem (circled in RED) Attachment: image_00089.jpg [ 77.19 KiB | Viewed 142 times ] Back of new unit (Has a sharp edge, hence doesnt fit) Attachment: image_00090.jpg [ 75.08 KiB | Viewed 161 times ] Back of old lower pocket (Has got cut corners, hence why it fit) Attachment: image_00095.jpg [ 50.78 KiB | Viewed 163 times ] Front of new unit Attachment: image_00091.jpg [ 88.53 KiB | Viewed 154 times ] Front of old unit Attachment: image_00092.jpg [ 50.76 KiB | Viewed 154 times ]
_________________ What do you call a Hyundai with dual exhausts? |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
new facia needed, or maybe just trim it up so it accepts the new unit?
|
||
| Top | |
||
| falcon1999 |
|
|||
|
FordFairmont wrote: new facia needed, or maybe just trim it up so it accepts the new unit? By facia do you mean the whole front panel? I was thinking of trimming it up but not sure if the new unit would slip out? What about aftermarket Din pockets? Do they exist for this configuration
_________________ What do you call a Hyundai with dual exhausts? |
|||
| Top | |
|||
| happydude666 |
|
|||
Age: 34 Posts: 201 Joined: 1st Dec 2008 Ride: BAxr6 mkII, BA xr6, EA Spac Location: Melbourne |
after market din pockets i dont think will help u with a double-din unit i dont think. i will check mine as it used to have a factory double-din unit and mine is and i6 not a v8 as well.
well mine was an spac so not even an xr, but i would suggest trimming ti and if u come up with an awesome way to get it stuck in (if it slips) let me know as atm mine is just sitting there and is wedged in on some loose wire i had.
_________________ Homer- Everytime i try to learn somethign new it pushes out old information! |
|||
| Top | |
|||
| Froudey |
|
||
|
Honestly the best thing would be to get a surround from an AU 1 that had a double din tape or cd player. It would be the best way to fix ya problem as the fascia surround justs "pops" off and the other one would push back on.
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| happydude666 |
|
|||
Age: 34 Posts: 201 Joined: 1st Dec 2008 Ride: BAxr6 mkII, BA xr6, EA Spac Location: Melbourne |
Froudey wrote: Honestly the best thing would be to get a surround from an AU 1 that had a double din tape or cd player. It would be the best way to fix ya problem as the fascia surround justs "pops" off and the other one would push back on. well sort of pops off you have 2 screws behind the ash tray which just slides out and then one more just above that hole where the player goes facing towards you. after that there are just clips round the edges and be careful to not break the clips as it may cause problems on refitting (still use some force though) once thats off u obviously need to un-clip the looms from your clock (if you have one), and rear demister. after that should just be and un screw job of everythign attached. p.s. u will need to slide off the cigarette lighter power cables form behind while unclipping the looms.
_________________ Homer- Everytime i try to learn somethign new it pushes out old information! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |
