|
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
yes.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| clampy |
|
||
|
ok just like a sensor isnt it
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Im not sure how it looks on your car but being a ford and assuming the engine in your car is pretty similar to mine the sensor is a decent sized gold mushroom head looking unit with a screw thread at the end that screws almost all the way in to the engine block and has a single wire connector on the end of it. It is a b**ch to get out without the car being on a hoist. I did it with a lot of swearing laying under the car and a sore back later. Mind you my car is a fairmont so there could be a bit of difference to yours.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| clampy |
|
||
|
yeah i know what ur talking about mine is not screwed it all the way to the head ill get a pic if i can
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| clampy |
|
||
|
ok gotta wait till i get to work to get the deep socket for it i dont have a socket to fit then ill try and tighten it up these is oil where the sender is.... also the sump gasket looks split so how hard is it get the sump off whats involved???
thanx for all the help to guys
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| tiny56 |
|
||
|
it may not be loose but will leak out the body of the sensor/switch
no fix for this other than replacement you can nip up the bolts on the sump but dont overtighten removing sump to replace gasket requires removing engine or k frame Last edited by tiny56 on Wed Jul 08, 2009 5:11 pm, edited 1 time in total. |
||
| Top | |
||
| clampy |
|
||
|
ok then how much ????
probbaly needs replacement
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| tiny56 |
|
||
|
clampy wrote: ok then how much ???? probbaly needs replacement depends whether yours is a switch for a light on your dash or a sender for a gauge |
||
| Top | |
||
| clampy |
|
||
|
just where the cable goes into the block where it screws into the block
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| RG Hunter |
|
||
|
They leak out of the switch where the wire connects, always replace with a new switch and do not over tighten, the thread on the switch does not have to go all the way in, it is a tappered thread.
|
||
| Top | |
||
| snap0964 |
|
|||
|
Degrease the whole area, and check it every few days or so, so you will be able to get a better idea where the leakage is - leaks have a habit of disguising their origin.
You might find it easiest to check the engine areas in the dark with a good torch.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| clampy |
|
||
|
done that there is a bit of oil (a lil puddle under it) where the sensor is ill just change it see what happens
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Change the switch and before you put it back in to be double safe that it wont leak put a little bit of thread tape on the sender. As said above you don't have to screw it all the way in. I screwed mine in about 3 quarters to the end and it has not leaked oil and is working beaut. Then degrease the engine and keep an eye on it.
P.S have fun. 
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| clampy |
|
||
|
yeah i have skinny arms lol ill attempt it
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 43 guests |
