|
| EALCON 3.9 |
|
||
|
Does the Wade 1636 regrind cam have any identifying marks on it to tell it apart from stock?
im gona be buying a secondhand one and dont wana get ripped off. |
||
| Top | |
||
| Shortshift |
|
|||
|
From the Wade cams I've received, they don't stamp or engrave anything to say it's been reground (or it's a particular grind). Short of having another stock cam to compare it with, I don't know how you'll tell by just looking at it.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
wade cams usually engrave the spec number on the end of the cam, however i have had two cams i bought from them without markings so its possible you wont know what your buying if thats the case
|
||
| Top | |
||
| krisisdog |
|
|||
|
Mine had it punched/engraved on the end, however its the only wade cam I've dealt with, so who knows?
|
|||
| Top | |
|||
| EALCON 3.9 |
|
||
|
thanks for the replies guys
ive got a stock one to compare to so il sus it out tonight. |
||
| Top | |
||
| Shortshift |
|
|||
|
Grab a vernier gauge and compare the differences in the cam lobes. If it's a stock cam the guys trying to palm off, you'll see it with the measurements. I can't suggest anyting else unless someone on here has a 1636 to give you some measurements.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| EALCON 3.9 |
|
||
|
picked up the cam last night, had 1636 stamped on the end.
cant wait to put it in. just gota hunt down some shims. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 85 guests |
