|
| maca_404 |
|
||
|
Hey I have a EB II Fairmont, Its an early Series two without smartlock etc. Anyway it has the feature which dims the interior lights for you, what I would like to do is actually shut it off so that if the doors are closed it just goes straight off. The wiring diagram from the manual isn't very help full it just show the wiring going to a "controller" with no further info. Does anyone have an idea how I might achieve this ?
|
||
| Top | |
||
| Steady ED |
|
|||
|
low series BEM?
but the questions begs to be asked, why?
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| maca_404 |
|
||
|
Well I want to hook in the +12 as a trigger on my alarm so that if someone opens the door or even just lifts the door handle the lights will come on setting off the alarm. Now all this works well but when leaving the car if the lights are on fade I cannot arm the alarm till they go off cause it thinks the door is open.
|
||
| Top | |
||
| Froudey |
|
||
|
maca_404 wrote: Well I want to hook in the +12 as a trigger on my alarm so that if someone opens the door or even just lifts the door handle the lights will come on setting off the alarm. Now all this works well but when leaving the car if the lights are on fade I cannot arm the alarm till they go off cause it thinks the door is open. there is alarms out that this feature is avaible, but this is fun playing with mates cars... A mate of mine had an alarm with this feature... used to drive up near it wind the window down and then pulled the handle... funny stuff.. BUT seriously a decent feature as the alarm goes off when the car is locked.
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
I have this feature on my car and it dosent effect the alarm. Most alarms usually have a delay before they completely arm.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| Nigel |
|
||
|
Put diodes on the door switches, and run a seperate wire to the alarm. You get to keep the delay that way
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 35 guests |
