Hi,
So iv decided to sell my XD 351C falcon ute.
A quick summary of what it has:

-its a real head turner, yuo can hear it coming
- 351 cleveland on Gas
-T5 manual gearbox
-full sound system with Dvd
-LTD interior and exterior(grill,wheel arch moulds, door moulds,etc)
-5 spoke 17 inch wheels 235/45R17
-Chrome roll bars
-New paint (1 or 2 small marks)

It has heaps of modification, which include:

Full LTD conversion inside and out
The underbody has been fully treated and painted to prevent rust, has a space cab conversion welded in for space behind the seats,all panels welded for one seam effect,fuel tank inspection cover modified for boot space with hinged flap on gas struts, has twin batteries in the tray under the fake floor. FE LTD front end guards,bonnet,bumper and lights. Headlights have black bezel conversion. Full set of chrome mouldings around wheel arches and windows (two wheel arch moulds are brand new), has a new windshield,brand new tarp with button clips, all original tie points have been covered for a cleaner look.

Has full LTD interior(i beleive from an XF-ZL) with electric seats,electric dash which was recalibrated by VDO for the V8 and XF heater box with electric controls, electric mirrors and windows, all new door seals and window rubbers, Kenwood touch screen with TV tuner (not hooked up at the moment,wiring needs to be looked at) and DVD player, 10 stacker CD, Pioneer 6.5" component speakers in front and 6.5" 3 way speakers in rear, 12 " kicker compVR sub powered by one 4 chanel Kicker amp and one 2 chanel Kicker amp powering the speakers. Auto dimming mirror with auto headlight control, New webasto sunroof with single push button operation and auto close, new power door locks with custom bracket to fit existing mounting points in dors, Solex locks, twin 3" roll bars. New evaporator and condensor for air con.

Running gear- Fully reconditioned 351 clevo with Gas heads rebuilt, EL twin thermo's, HM headers dragway extractors, T5 5 speed manual conversion with hydolic clutch and braided clutch lines with castelmaine rod shop bell housing,new uni's and drive shaft ballancing,9" diff with new seals. Rear disc conversion with complete rebuild calipers, Huge front brake upgrade with 330mm Mustang rotors,floating hub conversion with VT brake calipers (it stops awesome) with braided lines throughout,new slotted rotors front and rear with new brake pads. New suspension including Pedders gas shocks and super fat shocks in front, lowered reset leafs in rear and lowered front springs,all new ball joints and bushes,new camber bolts, new tyres.

It runs on straight LPG with a GAS research twin throttle body twin convertor set up,custon twin X pipe exhaust with dual dump pipes exiting behind the rear wheels.
Over $16 000 was spent by the previous owner. Since i have had it its been fully resprayed and looks great, it has a new battery, new starter motor and alternator, and the new tarp.It has 202 000km although the motor has done around 13 000km since rebuild.

I would love to keep it but at the moment its not what i need, its been well looked after, it gets washed every week (the interior photo is from previous owner)
I have heaps of the receipts from the previous owner regarding all the work done
Ph-0412 161 248 with any inquiries
My names Michael
Price-$13 000 ono

 

 

Attachments:

my ute.JPG [ 48.45 KiB | Viewed 177 times ]

interior.jpg [ 25.17 KiB | Viewed 223 times ]

DSC00370.JPG [ 45.86 KiB | Viewed 154 times ]

XD ute.JPG [ 244.28 KiB | Viewed 170 times ]

BUMP!!!!!!!!!
Heres a few more pictures

 

 

Attachments:

xd.JPG [ 53.52 KiB | Viewed 165 times ]

xd4.JPG [ 53.2 KiB | Viewed 200 times ]

x13.JPG [ 47.29 KiB | Viewed 167 times ]

the car is no longer for sale,
cheers

ya sell it mate or decide to keep her

What a machine!!

i can understand if you wanted to keep it, nice setup!
what mags are they, roh?

yeh na decided to keep her, i wanted to sell it but the owner (my dad) recons i should just keep it lol cant complain to much though, it is nice to drive, cheers

im not sure exactly on the wheels, il have a look and get back to ya

Where did you get the torno cover done? (with the clips?) Looks good. Was it expensive?

Nice ute!

um Smiths Trimmers at Lidcombe (just off parramtta rd near the olympic site). I cant remember how much it was off the top of my head il try find out for you.
BTW as circumstances have changed the car is FOR SALE