|
DMac |
|
||
Age: 38 Posts: 1372 Joined: 7th Nov 2004 Ride: Lancer Coupe Location: Southeastern suburbs, Melbourne |
Hey guys,
I put some sleeves on the cluster today and thought i would pull the middle plastic thing where the air con vents are. Its an EA. I pulled the dimister switch out and wanted to see what type of globe was in it. There is no point to that because it broke and its a soldered thing. Also i broke the dimister switch. It used to be spring loaded and you would push it and it would flick back up. It broke because when i was pulling it apart all teh s**t inside flung out when i opened it. So my engineering brain (pfft) came into action and now it is a switch that i have to push down then back up. Can anybody tell me how i might get it back to it original state with the globe being replaced aswell. I dont wanna have to buy a one. Cheers fellas |
||
Top | |
Happy |
|
|||
|
is this Chunkz?
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
Top | |
DMac |
|
||
Age: 38 Posts: 1372 Joined: 7th Nov 2004 Ride: Lancer Coupe Location: Southeastern suburbs, Melbourne |
No....wtf.....is that a joke or what, anyway i dont get it.
|
||
Top | |
twirqurky |
|
||
|
Yeah thats gotta be chunkz.
Ask Darren at FTG for a new one, he might be able to post you one. THats the best way cuz its the lazy way. |
||
Top | |
voxace |
|
|||
|
I removed the globe that I had in mine and put an LED in there instead.
About the switch, have you still got the little peice that goes inside or what, just put that bit on the opposite way to what you have it now and the switch should work properly again. |
|||
Top | |
DMac |
|
||
Age: 38 Posts: 1372 Joined: 7th Nov 2004 Ride: Lancer Coupe Location: Southeastern suburbs, Melbourne |
hey voxace
You wouldn't happen to know the specs of the LED you stuck in there and also at the moment i put the piece of metal with a dog so that the foot of the dog leg would be at the front of the car and the foot is at the bottom. I know it hard to understand but just bear with me. So your saying put the foot at the top. The only reason i didn't do that was it always had contact with the piece of metal it was only supposed to tap. Cheers |
||
Top | |
chunkz |
|
|||
|
C***
_________________ |
|||
Top | |
xine |
|
||
|
{USERNAME} wrote: is this Chunkz?
GOLD
_________________ FFS people im a chick!!
|
||
Top | |
DMac |
|
||
Age: 38 Posts: 1372 Joined: 7th Nov 2004 Ride: Lancer Coupe Location: Southeastern suburbs, Melbourne |
whats going on guys. come on let me in on the joke
|
||
Top | |
DMac |
|
||
Age: 38 Posts: 1372 Joined: 7th Nov 2004 Ride: Lancer Coupe Location: Southeastern suburbs, Melbourne |
dont i am LMAO, i just read the sunroof thread.
LMAO |
||
Top | |
voxace |
|
|||
|
{USERNAME} wrote: hey voxace
You wouldn't happen to know the specs of the LED you stuck in there and also at the moment i put the piece of metal with a dog so that the foot of the dog leg would be at the front of the car and the foot is at the bottom. I know it hard to understand but just bear with me. So your saying put the foot at the top. The only reason i didn't do that was it always had contact with the piece of metal it was only supposed to tap. Cheers Any LED will work fine, just make sure you use the correct resistor. I used one of the blue LED's from oatley electronics. With the switch, I had the same problem as you, and yea I just pulled it apart and put it the other way around. It didn't look like it was meant to go that way - but it does |
|||
Top | |
DMac |
|
||
Age: 38 Posts: 1372 Joined: 7th Nov 2004 Ride: Lancer Coupe Location: Southeastern suburbs, Melbourne |
okay cheers mate.
|
||
Top | |
DMac |
|
||
Age: 38 Posts: 1372 Joined: 7th Nov 2004 Ride: Lancer Coupe Location: Southeastern suburbs, Melbourne |
Hey voxace, just a question, i had a look in your gallery, how did you polish the rocker cover. Did you do it yourself or you got someone to do it.
Cheers mate |
||
Top | |
voxace |
|
|||
|
Just good ol wet and dry sandpaper and some elbow grease.
Start with 80 grit to 'try' and fix up ford s**t casting, then went thru the grades up to 1200, used 2000 grit too I think. Then just polished with some autosol. It's only half done though so far. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 22 guests |