|
Grechie |
|
||
|
Hey Guys
Im looking for a place, that sells E Series 6 cyl lightened flywheels, or a place that can lighten my current stock flywheel. Does such a place exist? - grechie
_________________ Ford Falcon EA Naturally Aspirated 4.0L i6 |
||
Top | |
gstewart |
|
||
|
just about any macine shop should be able to do it for you. i would seriously reccommend getting it re-balanced after too
|
||
Top | |
tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
just use a 302w neutral balance one with a V8 clutch.
Yellaterra sell one that have used befor. |
||
Top | |
rainoffire |
|
|||
|
http://www.tweakit.net/shop/index.php?c ... ahig478nh5
this place sells lightweight chromoly flywheels, you can get the xtreme aluminium ones too, but as far as i can tell you need to do a bolt conversion to fit them in. they arent cheap either!! |
|||
Top | |
twr7cx |
|
|||
|
tickford_6 wrote: just use a 302w neutral balance one with a V8 clutch. Yellaterra sell one that have used befor. The 302W gear fits straight up without tooo much hassles then? |
|||
Top | |
tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
twr7cx wrote: tickford_6 wrote: just use a 302w neutral balance one with a V8 clutch. Yellaterra sell one that have used befor. The 302W gear fits straight up without tooo much hassles then? So long as you get the neutral balanced one it will bolt straight on. But you have to use a V8 clutch I had some pedal height issues, Looking back i may have used the wrong throw out bearing. But i changed alot of related parts in one go so it's hard to say. In the end i made a custom link to join the cable to the pedal and made a solid item to replace the rubber link at the clutch fork end and fixed it that way. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 96 guests |