|
| twr7cx |
|
|||
|
I think I have just done the most retarded thing ever. Completely finished installing the manual gearbox, and just realised I forgot to put a spigot bearing in. Before I pull it all off again can someone just confirm for me that autos definitely don't have a spigot bearing in the back of the crankshaft?
|
|||
| Top | |
|||
| twase |
|
|||
|
No Spigot for Autos. Out she comes again unless its had a manual before and the spigot bearing is still there..
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| twr7cx |
|
|||
|
twason wrote: No Spigot for Autos. Out she comes again unless its had a manual before and the spigot bearing is still there.. Not sure what box was behind this bottom end previously, so I guess I've got to remove it and check now. Spewing. |
|||
| Top | |
|||
| Sommers NL |
|
|||
|
auto's have a little round part on the end of the convertor that sits in where a manual spigot bush sits.
_________________ BANNED!!!! |
|||
| Top | |
|||
| phongus |
|
|||
|
I've heard someone running without a spigot bearing without issues...but my memory is shot.
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Nigel |
|
||
|
Ive also seen damage caused by not having the bush - Input shaft bearings and retainer chewed out.
Fix it right. Nigel |
||
| Top | |
||
| twr7cx |
|
|||
|
phongus wrote: I've heard someone running without a spigot bearing without issues...but my memory is shot. phong =P~ You would have to be a retard to try that. The bearing is $5.40 brand new for an SKF one from Repco and a few hours to remove the box and refit vs the big chance of damage. |
|||
| Top | |
|||
| twase |
|
|||
|
I think the chances are more like 100% it will kill the box without a spigot bearing.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| OZBMX |
|
|||
|
twr7cx wrote: phongus wrote: I've heard someone running without a spigot bearing without issues...but my memory is shot. phong =P~ You would have to be a retard to try that. The bearing is $5.40 brand new for an SKF one from Repco and a few hours to remove the box and refit vs the big chance of damage. 5.40 i paid roughly double that for one from repco when i did mine, I wish i knew the part number though, as my mate had about 3 there already, ohwell.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| Krytox |
|
|||
|
as above, it'll kill the box and dont forget the pilot bearing makes sure the driven plate is in the centre.
No for Autos having a bearing. Ford make an awesome bearing, I bought on a few weeks ago, was iirc $27, I'll update and included the p/n and price. Sure any maker will work, but there are just some parts that exceed competition standards.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 95 guests |
