|
| jonathon |
|
|||||
|
i have spent all of today installing the el thermo fans in to a eb done all the wireing and the fans wont come on when the temp is up to half i have tried turning to knob on the thermo switch and nothing, but on the good side the air con one comes on when it should.
any ideas i need answer asap this is the diogram that i used thanks all
_________________ Owning 1 of 84,847 ebII. |
|||||
| Top | |
|||||
| Shortshift |
|
|||
|
Looks like a Davies Craig diagram. Have you checked for +12v at the fan & the relays when the aircon kicks in? Do both the fans run when connected directly to +12v?
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| DA22LE |
|
|||
|
Do you have an ED,EF,EL, ECU?? If not this could be the problem why the wont cone on. If you using an aftermarket set-up, like shorty said, check you power to the fans.
Cheers Daz
_________________ BA XR8 Boss 260 |
|||
| Top | |
|||
| jonathon |
|
|||
|
both fans worked today befor i started as i cheacked to make sure they worked, as for the ecu i am wiring them in to a ebll gli.
their is power and earth where its ment to be.
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| Shortshift |
|
|||
|
The EBII ECU won't operate the fans (if that's what you're trying to do). Maybe try using an EL ECU as they've got dedicated pins for the thermofans. Or, use a Davies Craig thermatic controller instead.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
You sure all the relay's are ok?
I built myself a circuit to operate my fan's that looks much like the one in the diagram. I have 3 relays and 3 power feeds running it, aircon only triggers passenger side fan, temp switch triggers both fans & the 2nd will start when temp get's hot enough & aircon is on. Shortly after installing & testing i had issues with the fan's not working properly, turned out a relay i was using (2nd hand i had lying around) crapped itself. Otherwise pull the wiring out of the car & lay it out on the ground, trace it & see what's up. Maybe there's a fault in it. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| GASSA |
|
||
|
Mate
You need the adjustable temperature sensor switch that u can set when the fans come on they are about $60 buy from repco you need them to work independent from A/C gassa
_________________ When the clutch drops the bull s**t stops!!!!! |
||
| Top | |
||
| jonathon |
|
|||
|
all sorted i didnt pick the correct ignition feed
thanks for all the help.
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Majestic-12 [Bot] and 104 guests |
