|
| MoNGooSE |
|
|||
|
Thanks for the help guys. It seems 5.0L E-series aren't the easiest things to come by in SA.
If I can find a complete one, wrecking or not, I'll grab it. But otherwise this can just be added to the "maybe one day" list... {USERNAME} wrote: Lol 5kw. You'll get more than 5kw from a half decent cam, and the exhaust note will change again. The wade 1636 gives a 5kw boost with the happiest of dynos. I've seen it many a time. Going anything other than a Wade will mean a lot more $$$ and not much, if anything, more to show for it. My car being a standard auto with standy stally and ECU means I'm very very limited as to what cams I can use. I've heard a 160rwkw EF running with a very lumpy cam and I will shoot the person that says it sounds as good as a V8. {USERNAME} wrote: not putting a downer on what you want to do.. but wouldnt it be easier to sell off the 6 and buy one thats already a v8??? Seen my car lately? There'd be more work in building another EF up to where mine is at the moment than there would be in changing mine to a V8
_________________ EF GT6 - 129.4rwkw - Feautured in Street Fords Issue #77 |
|||
| Top | |
|||
| MoNGooSE |
|
|||
|
OOOOOOOOOOOO!!!!!!!!!!
_________________ EF GT6 - 129.4rwkw - Feautured in Street Fords Issue #77 |
|||
| Top | |
|||
| MoNGooSE |
|
|||
|
Auction is tomorrow morning though and a fair way from me
 See what happens...
_________________ EF GT6 - 129.4rwkw - Feautured in Street Fords Issue #77 |
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: not putting a downer on what you want to do.. but wouldnt it be easier to sell off the 6 and buy one thats already a v8??? Seen my car lately? There'd be more work in building another EF up to where mine is at the moment than there would be in changing mine to a V8 i cant say i have seen your car lately.. and fair enough! just saying its an option.. as if you found a nice v8 you could mix n match parts from your 6 into the 8.. but its your call..and is a doable option either way.. |
||
| Top | |
||
| sd1800 |
|
||
|
{USERNAME} wrote: get a 5L wreck swap over looms/motor/trans sell the rest including your 4L s**t ??? profit if you can get a manual 5L wreck, that would be most excellent. ignore 4L fanbois, the faggots shouldn't even be in this forum. lol nice.
_________________ Formerly LV XR5 Turbo, AU Fairmont Ghia V8 & EBII Fairmont I6. |
||
| Top | |
||
| XR9UTE |
|
||
|
Yeah and flog off the 5.0 at the same time and get a 351 instead
|
||
| Top | |
||
| MoNGooSE |
|
|||
|
no... had uni
_________________ EF GT6 - 129.4rwkw - Feautured in Street Fords Issue #77 |
|||
| Top | |
|||
| philbie |
|
|||
|
big job the engine and trans are easy but the wiring is the hard part , you need an EF or EL as the Donner car for the wiring as you need to change the engine looms and that requires the dash to come out .the k frame's are the same , you need to change the power steer line and the ( if running ) auto lines radiators are the same . i was looking to do the conversion myself .it's a big hasel for a little result
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: big job the engine and trans are easy but the wiring is the hard part , you need an EF or EL as the Donner car for the wiring as you need to change the engine looms and that requires the dash to come out .the k frame's are the same , you need to change the power steer line and the ( if running ) auto lines radiators are the same . i was looking to do the conversion myself .it's a big hasel for a little result There's actually a lot less bolts holding the dash in place than most people think. And changing a wiring loom over is a piece of piss. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 37 guests |
