|
| Chadddy |
|
||
|
Just wondering what needs to be changed over, ecu, .... ?
Cheers, Chad.
_________________ |||| |
||
| Top | |
||
| Shortshift |
|
|||
|
Are you changing to the EL motor because you want a distributor instead of a coil pack? Or is your EF motor worn out and needs replacing?
You're going to need the engine loom and wiring back to the ECU. I think the EF & EL have a different number of ECU pins.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| Chadddy |
|
||
|
My engines just tired and have already purchased a worked EL engine, so looks like i need to find an EL loom
 , thanks for your help.
_________________ |||| |
||
| Top | |
||
| Froudey |
|
||
|
Chadddy wrote: My engines just tired and have already purchased a worked EL engine, so looks like i need to find an EL loom , thanks for your help.If it is just an engine swap all you have to do is to remove the Dizzy out of the EL engine and replace the with the EF "Dizzy" and it should be sweet.
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| alfy12 |
|
|||
|
Also check the EL harmonic as it may not have the 36-1 tooth trigger wheel for the edis ignition. If it hasn't got it, swap the harmonic over. As Froudey said, rip dizzy out and fit the EF cmp sensor. Everything else should be sweet.
_________________ NF Fairlane: Non Factory Dual Fuel - New coolant tank, New fuel injectors, New fuel pump, New earth cable, ECU capacitors replaced, New O2 sensor, leads and plugs, New Radiator/Condensor cleaned. 483,000kms. AU I6 Powered. Struts, Shockies, Tie rods and ball joints replaced. |
|||
| Top | |
|||
| Chadddy |
|
||
|
Awesome, thanks guys.
_________________ |||| |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
