|
twirqurky |
|
||
|
How hard is it to install the climate control setup for an EF?
Worth paying an auto electrician for? |
||
Top | |
uglybob |
|
|||
|
ask greg (Happy) - this slack prick is going to get around ot it eventually...
but its bloody hard work dylan!
_________________ R.I.P. Scotty |
|||
Top | |
Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
its a dash out job afaik....but you could colour your dash black when you get it out to suit the rest of your car
_________________ |
|||
Top | |
Happy |
|
|||
|
hey I resemble that comment!!
I wouldn't even try asking an auto electrician to do it Dylan, he would be learning as he went and would end up costing you an absolute fortune in labour costs. Having not done it I can't give you step by steps but some tips. From what I can gather the easiest thing to do is upgrade your interior loom to a high series one out of an EF (in your case) fairmont and upgrade to the high series BEM also. Forget the high series loom out of the Fairlane. That will give you all the plugs you need without having to re-wire your low series gli loom. Which is pretyt much holding me, and fuzion, up at this point - I'm not interested in trying to hack at mine. Maybe pierre is just really lazy like me hehe. I also would advise in getting an airbox out of fully functional fairmont with cc also, degassing your existing system, swap it over and have it regassed. You can do it without but it means un-screwing or in some cases un-pop riveting the fan and vent motors and I reckon it is just too hard. There is also a bit in the cc mod doco which isn't quite finished - to do with the fan speed controllers and retro fitting them onto a low series airbox. The entire dash needs to come out, you will have to strip it right back to plan plenty of time to do it properly and have everything ready to go when you start. One day I will finish my back yard - which means I will then build my shed - which means I will then do my cc mod on my gli. Not sure which side of christmas 2008 that will be!! Ask away if you need any help...
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
Top | |
twirqurky |
|
||
|
Happy wrote: hey I resemble that comment!!
I wouldn't even try asking an auto electrician to do it Dylan, he would be learning as he went and would end up costing you an absolute fortune in labour costs. Having not done it I can't give you step by steps but some tips. From what I can gather the easiest thing to do is upgrade your interior loom to a high series one out of an EF (in your case) fairmont and upgrade to the high series BEM also. Forget the high series loom out of the Fairlane. That will give you all the plugs you need without having to re-wire your low series gli loom. Which is pretyt much holding me, and fuzion, up at this point - I'm not interested in trying to hack at mine. Maybe pierre is just really lazy like me hehe. I also would advise in getting an airbox out of fully functional fairmont with cc also, degassing your existing system, swap it over and have it regassed. You can do it without but it means un-screwing or in some cases un-pop riveting the fan and vent motors and I reckon it is just too hard. There is also a bit in the cc mod doco which isn't quite finished - to do with the fan speed controllers and retro fitting them onto a low series airbox. The entire dash needs to come out, you will have to strip it right back to plan plenty of time to do it properly and have everything ready to go when you start. One day I will finish my back yard - which means I will then build my shed - which means I will then do my cc mod on my gli. Not sure which side of christmas 2008 that will be!! Ask away if you need any help... Yeah yeah Greg, sounds like too much work. Might get fraud to look at it, itll cost more then the CC unit. |
||
Top | |
Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
u know...u could just buy a fairmont
_________________ |
|||
Top | |
uglybob |
|
|||
|
mitch_anderson wrote: u know...u could just buy a fairmont
lol wheres the fun in that?!?! dylan - don't even go near ford! unless you have an arm, a leg, and all 3 of your testicals to donate as part-payment!
_________________ R.I.P. Scotty |
|||
Top | |
Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
errrrm... i dunno
duz anyone know if multipoint manual signed back up to the forum?
_________________ |
|||
Top | |
fuzion |
|
||
|
sad part is i made up all the looms for a low series bem already
and now go ta high series loom to put in the dash instead! lol good few hour soldering those cables up neatly for no reason now |
||
Top | |
ch0c0 |
|
||
|
the ugly bit is all those vacuum lines
we did the heater box in jases el cuz the core was leaking put it all back together, and a vacuum line got kinked so it all had to come back out again personally i wouldnt bother non climate control is cooler in summer and warmer in winter, id remove mine if i could be bothered, but the ambient temp is nice and handy.
_________________ BOOSTED |
||
Top | |
twirqurky |
|
||
|
Ahhh...right...gotta find someone who can install it in the Brisbane area? Maybe a wreckers?
Gotta buy it first I guess. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 92 guests |