Fordmods Logo

Home » Forums » Fordmods Tech » V8 Workshop

EL 5.0 Timing cover, the same as EB-EF 

 

Page 2 of 2 [ 23 posts ] Go to page Previous  1, 2

Post New Topic Post Reply  Previous topic Next topic
 
green car
 Post subject: Re: EL 5.0 Timing cover, the same as EB-EF
Posted: Tue Sep 08, 2009 12:39 pm 
Getting Side Ways
Offline

Age: 115

Posts: 927

Joined: 27th Sep 2007

Location: Adelaide
SA, Australia
{USERNAME} wrote:
Oh and this is what you want when you need either a new pump or cover.....
http://www.latemodelrestoration.com/item/M8501A50


i couldnt see bolt holes for the timing pointer/mag pickup on the timing cover, did i miss them?

 

_________________

165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way...
Top
 Profile  
 
 
V8 Ghia Mike
 Post subject: Re: EL 5.0 Timing cover, the same as EB-EF
Posted: Wed Sep 09, 2009 12:05 am 
Getting Side Ways
Offline

Age: 55

Posts: 419

Joined: 16th Jan 2005

Ride: EF Ghia 5.0

Location: Adelaide
SA, Australia
Guys, what sort of puller do I need to remove and replace the harmonic balancer? Or do they just pull off when the four bolts are removed?

Cheers, Mike

 

_________________

EF Ghia 5.0 - XR8 in a tuxedo....classy, low and loud

Bordeaux Purple, Tickford kit, slammed, 18" BA XR8's, EL Ghia chrome, full leather, Pioneer audio, C&C, ABS, LSD, Crane cam, GT40P heads, high flow cats, Genie extractors, lots of woodgrain, chrome and interior lights!
Top
 Profile  
 
 
XR9UTE
 Post subject: Re: EL 5.0 Timing cover, the same as EB-EF
Posted: Wed Sep 09, 2009 11:12 am 
EFI Guru
Offline

Age: 59

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia
You need a harmonic balancer puller.
Top
 Profile  
 
 
V8 Ghia Mike
 Post subject: Re: EL 5.0 Timing cover, the same as EB-EF
Posted: Fri Sep 11, 2009 10:15 am 
Getting Side Ways
Offline

Age: 55

Posts: 419

Joined: 16th Jan 2005

Ride: EF Ghia 5.0

Location: Adelaide
SA, Australia
{USERNAME} wrote:
You need a harmonic balancer puller.


:)

Yeah, but what type? 3-legged, 2 threaded-rod type or what? I'm assuming the latter, which would screw into two of the four bolt holes? I don't know what size the thread in the crank is either, to mount the puller to get the new balancer back on.

Mike

 

_________________

EF Ghia 5.0 - XR8 in a tuxedo....classy, low and loud

Bordeaux Purple, Tickford kit, slammed, 18" BA XR8's, EL Ghia chrome, full leather, Pioneer audio, C&C, ABS, LSD, Crane cam, GT40P heads, high flow cats, Genie extractors, lots of woodgrain, chrome and interior lights!
Top
 Profile  
 
 
banarcus
 Post subject: Re: EL 5.0 Timing cover, the same as EB-EF
Posted: Fri Sep 11, 2009 12:01 pm 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 1093

Joined: 29th Nov 2004

Gallery: 15 images

Ride: BA Ford Fairlane V8

Location: Lower Hunter Valley
NSW, Australia
I bought a cheapy $20 one that has three sets of different bolts. Did the job very easily.

 

_________________

Interested in a fair go for the {DESCRIPTION} area of NSW?
Top
 Profile  
 
 
XR9UTE
 Post subject: Re: EL 5.0 Timing cover, the same as EB-EF
Posted: Sat Sep 12, 2009 2:11 pm 
EFI Guru
Offline

Age: 59

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia
Toledo Part#254230 is a universal kit that I have...works good.
Top
 Profile  
 
 
V8 Ghia Mike
 Post subject: Re: EL 5.0 Timing cover, the same as EB-EF
Posted: Sat Sep 12, 2009 6:52 pm 
Getting Side Ways
Offline

Age: 55

Posts: 419

Joined: 16th Jan 2005

Ride: EF Ghia 5.0

Location: Adelaide
SA, Australia
Thanks guys, got the new balance in today. The only problem was one pulley bolt that refused to come out. Fixed that by hammering an old ring spanner over it and cracking it with the hammer. :)

All in all, a pretty simple job that shouldn't take more than an hour if nothing goes wrong. Car much smoother now- it was really vibrating at 1300rpm, about 60km/h in 4th. Very annoying!

Timing cover is leaking along both sides, nothing major, but hard to tell if it's just the gasket or the cover itself dissolving. :shock:

Mike

 

_________________

EF Ghia 5.0 - XR8 in a tuxedo....classy, low and loud

Bordeaux Purple, Tickford kit, slammed, 18" BA XR8's, EL Ghia chrome, full leather, Pioneer audio, C&C, ABS, LSD, Crane cam, GT40P heads, high flow cats, Genie extractors, lots of woodgrain, chrome and interior lights!
Top
 Profile  
 
 
EBI347
 Post subject: Re: EL 5.0 Timing cover, the same as EB-EF
Posted: Sat Sep 12, 2009 8:45 pm 
Tyre Shredder
Offline
User avatar

Age: 49

Posts: 363

Joined: 7th Feb 2007

Ride: BLOWN 347 EB GT/ BF XR6 TURBO

Power: 345 rwkw

Location: eastern creek
NSW, Australia
dude made sure it not your thermostat housing thats leaking not your timing cover as it would be a b**ch if you replaced it and you still got a leak???? :twisted:

 

_________________

MY CAR PLZ TAKE A LOOK forums/xtt909-update-t66227.html

DAZFAB MEMBERS ,,,,DAZZLE, EBI347, TERRORISTGHIA, TROYMAN ,SWC, XTT909
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 2 of 2  [ 23 posts ]  Go to page Previous  1, 2
Jump to:  

Home » Forums » Fordmods Tech » V8 Workshop

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Dec 28, 2024 8:35 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names