|
| havok |
|
|||
|
Hey guys, I have been looking at some cheap short shifters from the US to fit mustang T5's from 1983-2003... Wondering if they would fit an EL T5?
cheers
_________________ EBII S XR6: 5 Speed short shifter, 4499s, gutted cat, 2.5" Redback, K&N Pod. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
yes..!!!!
i got one in my ea box that i got from us to suit a mustang t5...there half the price of the ones available here in aus... |
||
| Top | |
||
| havok |
|
|||
|
Awesome!
I was looking at this one in particular... http://cgi.ebay.com/ebaymotors/1994-98- ... ccessories How hard are they to install? do you have to take the centre console out? Cheers
_________________ EBII S XR6: 5 Speed short shifter, 4499s, gutted cat, 2.5" Redback, K&N Pod. |
|||
| Top | |
|||
| shazza9275 |
|
||
|
they any good ?
|
||
| Top | |
||
| krisisdog |
|
|||
|
Yep should be fine bro. I've got a Steeda shifter, and its listed for Muzzy's too... But I would be tempted to get a brand name shifter tho... but if its cheap enough and works well enough, she be right.
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
havok wrote: Awesome! I was looking at this one in particular... http://cgi.ebay.com/ebaymotors/1994-98- ... ccessories How hard are they to install? do you have to take the centre console out? Cheers that looks the same as my one but from a different seller.. they are fairly easy to fit.. you can either undo your gearbox x member to drop the box down a little to get to the front bolts.. or you can drill 2 large holes in your trans tunnel over the bolts so you can get a socket on the bolts.. i think there pretty good!! no problems with my one so far.. and i havnt missed a 3rd gear shift since i fitted it lol... |
||
| Top | |
||
| havok |
|
|||
|
yea i occasionally miss third lols. Might have a look into those tomorrow (payday)
cheers guys
_________________ EBII S XR6: 5 Speed short shifter, 4499s, gutted cat, 2.5" Redback, K&N Pod. |
|||
| Top | |
|||
| havok |
|
|||
|
I have read that a few of the ones off of ebay are angled due to the left hand drives? is this the case with the one I sent a link to?
_________________ EBII S XR6: 5 Speed short shifter, 4499s, gutted cat, 2.5" Redback, K&N Pod. |
|||
| Top | |
|||
| dahayes |
|
||
|
Havok picked up one of these last week gunna fit it tonight so ill keep you posted, doesnt seem too hard though.they are fairly adjustable to i dont think the LHD will be an issue.
|
||
| Top | |
||
| dahayes |
|
||
|
|||
| Top | |
||
| dahayes |
|
||
|
|||
| Top | |
||
| havok |
|
|||
|
I just bought the shifter, so it will take probably 9-14 days to get here from the states. I don't really want to drop the gearbox out as I don't have a jack to support it or a torque wrench, can I just drill two holes in the trans tunnel to put the new shifter in?
_________________ EBII S XR6: 5 Speed short shifter, 4499s, gutted cat, 2.5" Redback, K&N Pod. |
|||
| Top | |
|||
| havok |
|
|||
|
The short shifter is in!!! It was fairly easy, just cut a bit of the metal away to get at those two bolts, then it was easy as. Feels great, cheers for your help guys.
_________________ EBII S XR6: 5 Speed short shifter, 4499s, gutted cat, 2.5" Redback, K&N Pod. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 80 guests |
