Fordmods Logo

Home » Forums » Fordmods Markets » For Sale- Automotive

FS [NSW]: EF ghia door trims 

 

Page 1 of 1 [ 15 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
Mr Ed
 Post subject: EF ghia door trims
Posted: Mon Jul 13, 2009 10:02 pm 
Commercial Sponsor
Offline
User avatar

Age: 41

Posts: 141

Joined: 21st Apr 2005

Ride: KH 4x4 turbo tx3

Location: lismore
NSW, Australia
ef ghia woodgrain door trims $100 pickup Lismore NSW

 

 

Attachments:
2008_1130Image0037.JPG
2008_1130Image0037.JPG [ 51.88 KiB | Viewed 152 times ]
2008_1130Image0036.JPG
2008_1130Image0036.JPG [ 46.34 KiB | Viewed 161 times ]

 

_________________

KF 4x4 turbo tx3...with very few stock parts!
Forged bottom end, oversize pistons, Autronic ECU, D2 coilovers.
22 p.s.i

www.playwithcarbon.com
For all your carbonfiber, fiberglass needs!

Last edited by Mr Ed on Thu Aug 06, 2009 6:14 pm, edited 1 time in total.
Top
 Profile  
 
 
Lay3d_low
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Mon Jul 20, 2009 12:26 am 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 740

Joined: 25th Apr 2008

Gallery: 10 images

Ride: XE 351, EL Fairmont Ghia 5 Litre

Location: Newcastle
NSW, Australia
are these trims in the grey colour?

 

_________________

Sexy Xe :)
Top
 Profile  
 
 
Mr Ed
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Mon Jul 20, 2009 11:15 am 
Commercial Sponsor
Offline
User avatar

Age: 41

Posts: 141

Joined: 21st Apr 2005

Ride: KH 4x4 turbo tx3

Location: lismore
NSW, Australia
yeh, there a bit darker than the el trims. I was going to take the woodgrain bits off and put them on my existing trims, but my car is for sale now so no need for them.

 

_________________

KF 4x4 turbo tx3...with very few stock parts!
Forged bottom end, oversize pistons, Autronic ECU, D2 coilovers.
22 p.s.i

www.playwithcarbon.com
For all your carbonfiber, fiberglass needs!
Top
 Profile  
 
 
Mr Ed
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Thu Jul 30, 2009 6:45 pm 
Commercial Sponsor
Offline
User avatar

Age: 41

Posts: 141

Joined: 21st Apr 2005

Ride: KH 4x4 turbo tx3

Location: lismore
NSW, Australia
bump

 

_________________

KF 4x4 turbo tx3...with very few stock parts!
Forged bottom end, oversize pistons, Autronic ECU, D2 coilovers.
22 p.s.i

www.playwithcarbon.com
For all your carbonfiber, fiberglass needs!
Top
 Profile  
 
 
Mr Ed
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Thu Aug 06, 2009 6:14 pm 
Commercial Sponsor
Offline
User avatar

Age: 41

Posts: 141

Joined: 21st Apr 2005

Ride: KH 4x4 turbo tx3

Location: lismore
NSW, Australia
price drop

 

_________________

KF 4x4 turbo tx3...with very few stock parts!
Forged bottom end, oversize pistons, Autronic ECU, D2 coilovers.
22 p.s.i

www.playwithcarbon.com
For all your carbonfiber, fiberglass needs!
Top
 Profile  
 
 
chris james
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Thu Aug 06, 2009 8:31 pm 
Oompa Loompa
Offline

Age: 46

Posts: 31

Joined: 30th Jul 2007

Ride: Brocky

Location: Lockrose
QLD, Australia
hey mate, would u post to brissy?

 

_________________

Take it easy or if shes easy take her home!
Top
 Profile  
 
 
Mr Ed
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Thu Aug 06, 2009 8:35 pm 
Commercial Sponsor
Offline
User avatar

Age: 41

Posts: 141

Joined: 21st Apr 2005

Ride: KH 4x4 turbo tx3

Location: lismore
NSW, Australia
i go to brissy a fair bit so could take them up next time im up?

 

_________________

KF 4x4 turbo tx3...with very few stock parts!
Forged bottom end, oversize pistons, Autronic ECU, D2 coilovers.
22 p.s.i

www.playwithcarbon.com
For all your carbonfiber, fiberglass needs!
Top
 Profile  
 
 
Mr Ed
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Tue Sep 22, 2009 7:59 pm 
Commercial Sponsor
Offline
User avatar

Age: 41

Posts: 141

Joined: 21st Apr 2005

Ride: KH 4x4 turbo tx3

Location: lismore
NSW, Australia
bump

 

_________________

KF 4x4 turbo tx3...with very few stock parts!
Forged bottom end, oversize pistons, Autronic ECU, D2 coilovers.
22 p.s.i

www.playwithcarbon.com
For all your carbonfiber, fiberglass needs!
Top
 Profile  
 
 
riverracer
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Wed Sep 23, 2009 11:12 pm 
Fordmods Newbie
Offline

Age: 59

Posts: 6

Joined: 21st Sep 2009

Ride: el falcon

Location: adelaide
SA, Australia
still have them?
you say "there a bit darker than the el trims", they look the same colour / tone as my el's!
do you know if the rear door on a wagon is the same?
are they split/ damaged?
would u post to adelaide?

thanks

 

_________________

'97 EL wagon, 5 speed _ '98 - present
'89 EA sedan, manual _ '90 - '98
was over on the dark side ... '82 - '90
Top
 Profile  
 
 
Mr Ed
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Thu Sep 24, 2009 11:33 am 
Commercial Sponsor
Offline
User avatar

Age: 41

Posts: 141

Joined: 21st Apr 2005

Ride: KH 4x4 turbo tx3

Location: lismore
NSW, Australia
the colour was close to my el ones just a smidge darker.. i can just send the wood bits if you want them.. then you just put them on your own trims.. don't know about the back doors sorry

 

_________________

KF 4x4 turbo tx3...with very few stock parts!
Forged bottom end, oversize pistons, Autronic ECU, D2 coilovers.
22 p.s.i

www.playwithcarbon.com
For all your carbonfiber, fiberglass needs!
Top
 Profile  
 
 
Mickus
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Thu Sep 24, 2009 6:21 pm 
Smokin em up
Offline
User avatar

Age: 37

Posts: 265

Joined: 10th Nov 2005

Ride: ED Futura

Location: Melbourne
VIC, Australia
I had a set of EF trims I sold recently, the grey was slightly darker and a bit more blue than the EL trims.

 

_________________

"We will rise from chaos to elude this damnation, Hail horror, hail infernal world, better to reign in hell than serve in heaven"
Top
 Profile  
 
 
riverracer
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Thu Sep 24, 2009 6:42 pm 
Fordmods Newbie
Offline

Age: 59

Posts: 6

Joined: 21st Sep 2009

Ride: el falcon

Location: adelaide
SA, Australia
was looking for complete door trims without manual window winders.

thanks anyway

 

_________________

'97 EL wagon, 5 speed _ '98 - present
'89 EA sedan, manual _ '90 - '98
was over on the dark side ... '82 - '90
Top
 Profile  
 
 
96NLDuchess
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Mon Oct 05, 2009 2:42 am 
Fordmods Newbie
Offline

Age: 69

Posts: 4

Joined: 21st Oct 2006

Ride: Ford NL Fairlane Ghia Concorde

Location: Grafton
NSW, Australia
Do you still have trims available, will they fit NL Fairlane, mine have broken off, just down the road at Grafton
Top
 Profile  
 
 
Mr Ed
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Mon Oct 05, 2009 9:58 am 
Commercial Sponsor
Offline
User avatar

Age: 41

Posts: 141

Joined: 21st Apr 2005

Ride: KH 4x4 turbo tx3

Location: lismore
NSW, Australia
no idea if they will fit an NL but yes they are still available

 

_________________

KF 4x4 turbo tx3...with very few stock parts!
Forged bottom end, oversize pistons, Autronic ECU, D2 coilovers.
22 p.s.i

www.playwithcarbon.com
For all your carbonfiber, fiberglass needs!
Top
 Profile  
 
 
OZBMX
 Post subject: Re: FS [NSW]: EF ghia door trims
Posted: Mon Oct 05, 2009 10:59 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 1997

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia
yes they will fit an NL but yount have your extra courtesy lights, although you could refit the courtesy lights to these trims from your broken ones.

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 15 posts ] 
Jump to:  

Home » Forums » Fordmods Markets » For Sale- Automotive

Who is online

Users browsing this forum: No registered users and 95 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Jan 12, 2025 12:59 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names