|
| FORDom |
|
||
|
Ever since installing my au motor, the gauge on my cluster always shows high when engine running..when i switch it on it shoots straight to max and stays there..could this be a faulty sensor or will it be running full due to the rebuild with new oil pump?
|
||
| Top | |
||
| TROYMAN |
|
||
|
what sender did you use??
either its the wrong sensor or there is a brake in the connection.. |
||
| Top | |
||
| FORDom |
|
||
|
i used the one that was included with the au motor..but they all have the same part number (ea-au)
i did notice though theres one thats for the sensor and one for the gauge..do these go in the same spot and you use which ever one u need (gauge if u have xr or fairmont cluster)?? |
||
| Top | |
||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
if you have a gauge and not a light only then u need to use a sender and not a switch
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| TROYMAN |
|
||
|
FORDom wrote: i used the one that was included with the au motor..but they all have the same part number (ea-au) i did notice though theres one thats for the sensor and one for the gauge..do these go in the same spot and you use which ever one u need (gauge if u have xr or fairmont cluster)?? if your engine came from a base model forte or futura it has the switch type for the light.. fit the one from your ef engine and it will be ok... |
||
| Top | |
||
| krisisdog |
|
|||
|
Yeh you've got a switch (on/off) rather than a sender (variable).
|
|||
| Top | |
|||
| FORDom |
|
||
|
thanks guys, ill have to get a new sender and put that in.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 101 guests |
