|
| WGN-485 |
|
|||
|
Anyone know if a AU V8 LTD diff centre with a 3.23:1 will fit into a AU 2 wagon 6cyl or can it even be done?
Also any chance this is LSD? it says high performance on the sticker. 
_________________ EF Turbo Track Hack |
|||
| Top | |
|||
| sd1800 |
|
||
|
I can confirm it is a LSD if it came from a LTD.
Wouldn't have a clue if it will fit a wagon...
_________________ Formerly LV XR5 Turbo, AU Fairmont Ghia V8 & EBII Fairmont I6. |
||
| Top | |
||
| 67RCE |
|
||
|
The internals from that diff will fit in your diff, but the IRS will not fit the wagon. So you can pull the hemisphere out of the IRS setup and bolt in into a live axle. I can confirm this works, as I have an EB open centre hemisphere in my AU IRS with a 4wd systems Lokka
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| cjh |
|
|||
|
WGN-485 wrote: Anyone know if a AU V8 LTD diff centre with a 3.23:1 will fit into a AU 2 wagon 6cyl or can it even be done? Also any chance this is LSD? it says high performance on the sticker. When the tag says " High Performance "....it means it has a 28 spline, 4 pinion single legger. They are not LSD......it would say it was an LSD if it were. As for fitting into a wagon axle assembly, I don't know, The IRS diffs have a plug looking thing inside them, where the side gears are......unlike non-IRS diffs, you can see shafts and stuff inside the centre.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| 67RCE |
|
||
|
cjh wrote: WGN-485 wrote: Anyone know if a AU V8 LTD diff centre with a 3.23:1 will fit into a AU 2 wagon 6cyl or can it even be done? Also any chance this is LSD? it says high performance on the sticker. When the tag says " High Performance "....it means it has a 28 spline, 4 pinion single legger. They are not LSD......it would say it was an LSD if it were. As for fitting into a wagon axle assembly, I don't know, The IRS diffs have a plug looking thing inside them, where the side gears are......unlike non-IRS diffs, you can see shafts and stuff inside the centre. Read my post above. The internals are the same with the exception of a circlip groove machined into the side gears/cones. I have done the reverse and put live axle stuff into my IRS housing. It works, speaking from experience here.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 114 guests |
