Just been trying to re-position the drivers right side two airvents that have slipped inside a little, there is a small frame wrapping around, tried a blunt knife, SOFTLY no idea here, is there a easy way to get these back in the right place, I have taken the Center ones out after heaps of screws, and after looking at these I see a Box Frame comking out from the inside with lugs holding in place
Been thinking of making a HOOK WIRE to get inside vent from the outside and the kitchen knife as a slide for the end and pulling the wire, AGAIN SOFTLY, not much room to work with from the OUTSIDE, if what I see of the CENTER ones might have to take Whole DASH out

These things are a real pain in the a**.

There is no easy way to fix it. It will just take perseverance and imagination.

Good Luck
BenJ

BenJ

Not the reply I was after - but so be it - thanks for your reply