|
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Hi guys today i noticed the rear pads were low on my EB so naturally i attempted to replace the pads. What has happened is when i was bolting the caliper back onto the car as i was tightening the bolt it has stripped the inside thread on the part of the car it mounts on. It was fixed a while ago with a Heli coil but has stuffed up again. Can that piece of the car the caliper bolts to be easily unbolted and replaced?
 . Any advise guys is appreciated. My weekend has been nothing but disaster .Cheers, Shaun.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
yeah the caliper mount plates are bolt on.
|
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Great thanks Elf.
Back to Pick and pay less soon. At the moment the bolt hardly tightens so i want to fix it properly. Luckily the top one is OK.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| cjh |
|
|||
|
You gotta pull the axle out to replace it....uses the same bolts ( 4 ).
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 33 guests |
