|
| Bradelz77 |
|
||
|
Hey guys, I recently did a caliper repair kit, got my front rotors machined new pads etc, put them all back in, and its making a weird clunking sound when I hit the brakes on occasions from the front passenger side only. Also those little metal slide things that tuck under your brake pads at the tops, are they vital? Because there were 2 missing from that front side. Also thinking of doing the back brakes, now I took the calipers off, whats stopping the rotor from sliding off? Or have I forgot something?
Thanks heaps guys |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
When you change the pads you need to also re grease the slides or else they can stick and cause the problem you have.
As for changing the back rotors when you take of the caliper there is a screw in the disk that you need to take out. After thats done the disk should come off with a few taps of a hammer around the back of the disk.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
93EB wrote: After thats done the disk should come off with a few taps of a hammer around the back of the disk. as long as the handbrake is off! 
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| Bradelz77 |
|
||
|
Thanks for the reply mate,
I greased those slides up and replaced the rubber boots that were perished, but there were these other little thin metal slides that go under your brake pad tabs up the top and bottom to ensure the pads don't move around I'm assuming this could be the problem I have. Thanks for the advice re rear brakes, I have only ever done drums so discs are a bit of a new thing for me, thanks for the tip. Brad |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
The metal slides that go under the pads could cause a problem as they usually have a little grease on them to help easier pad movement. I suggest to grab some next time you go out to a wrecking yard.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| MadMatt |
|
|||
|
Bradelz77 wrote: Thanks for the reply mate, I greased those slides up and replaced the rubber boots that were perished, but there were these other little thin metal slides that go under your brake pad tabs up the top and bottom to ensure the pads don't move around I'm assuming this could be the problem I have. Thanks for the advice re rear brakes, I have only ever done drums so discs are a bit of a new thing for me, thanks for the tip. Brad The rear discs have a drum style hand brake on the inside them.
_________________ Member Number 8804 |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
MadMatt wrote: Bradelz77 wrote: Thanks for the reply mate, I greased those slides up and replaced the rubber boots that were perished, but there were these other little thin metal slides that go under your brake pad tabs up the top and bottom to ensure the pads don't move around I'm assuming this could be the problem I have. Thanks for the advice re rear brakes, I have only ever done drums so discs are a bit of a new thing for me, thanks for the tip. Brad The rear discs have a drum style hand brake on the inside them. With that mentioned you will also need the special tool for winding back the handbrake piston into the caliper.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| MadMatt |
|
|||
|
93EB wrote: MadMatt wrote: Bradelz77 wrote: Thanks for the reply mate, I greased those slides up and replaced the rubber boots that were perished, but there were these other little thin metal slides that go under your brake pad tabs up the top and bottom to ensure the pads don't move around I'm assuming this could be the problem I have. Thanks for the advice re rear brakes, I have only ever done drums so discs are a bit of a new thing for me, thanks for the tip. Brad The rear discs have a drum style hand brake on the inside them. With that mentioned you will also need the special tool for winding back the handbrake piston into the caliper. That is pre EF with the hand brake as part of the caliper.
_________________ Member Number 8804 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 70 guests |
