|
| msman |
|
||
|
this may be the stupidest question but what should i use to connect all the wire up power and speakers, replacin hu, those connectors thingies, twist and shrink sleeve, solder???
any one please
_________________ why do u write in here. |
||
| Top | |
||
| fordgt290 |
|
||
|
well solder does have less resistance than connectors, but connectors are easyer as u can pull them off its up to u really
|
||
| Top | |
||
| msman |
|
||
|
i don't mind puttin in abit more effort now or latter down the track, just want the best result.
so solder i guess? thanks for reply
_________________ why do u write in here. |
||
| Top | |
||
| ch0c0 |
|
||
|
solder and heat shrink is the best way to go.
_________________ BOOSTED |
||
| Top | |
||
| madmax |
|
|||
|
If its a permanant join your looking for then solder and heat shrink is the go.
I have found that if a connector is required it is still better to solder and shrink. I remove plastic from connector, solder on the wire, slip some heat shrink over the connector and shrink with hot air gun. With the heat shrink, cover the entire female connector, only cover the solder joint on the male. Do it this way you will have a more professional looking job and no troubles with broken connections later.
_________________
|
|||
| Top | |
|||
| pyroay |
|
|||
Age: 44 Posts: 2121 Joined: 14th Dec 2004 Ride: FG Turbo Territoty Ghia Location: Traralgon |
Solder and heatshrink. Definately worth it when you dont have a wire come loose and blow a fuse durnig a 1000km trip to Sydney or something. Or have the dodgy rear spekaer that crackles because of the crimp connector.
_________________
|
|||
| Top | |
|||
| fairmont1998 |
|
|||
|
Another vote for solder here.
_________________ 2008 WQ Fiesta XR4 |
|||
| Top | |
|||
| DMac |
|
||
Age: 38 Posts: 1372 Joined: 7th Nov 2004 Ride: Lancer Coupe Location: Southeastern suburbs, Melbourne |
yeah solder, if no heat shrink, use tape, but minimum you need to solder.
|
||
| Top | |
||
| Kenwood Maverick |
|
|||
|
solder, never setle for anything less. i haven't used shrink before on deck installs but i guessit would work. i always use eleccy tape. does hte job well. don't ever use quick crimp s**t unless u have to, like a fan in a removable panel or something
|
|||
| Top | |
|||
| madmax |
|
|||
|
Kenwood Maverick wrote: solder, never setle for anything less. i haven't used shrink before on deck installs but i guessit would work. i always use eleccy tape. does hte job well. don't ever use quick crimp s**t unless u have to, like a fan in a removable panel or something
You should try heat shrink, far better than elec tape. If you really need to use a connector for a join that may need disconnecting later, solder the wire to it, don't crimp it. That way you get the best of both worlds.
_________________
|
|||
| Top | |
|||
| msman |
|
||
|
thnks everyone,
now r there universal mounting brackets available or do i just mod my current ones or built new ones from scratch. can u tell i'm a newbie at this yet?
_________________ why do u write in here. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
