Item: 302w EFI Tunnel Ram
Price: $1200
Type: Part
Condition: Used

Description: Custom made intake manifold, twin carb base with billet base plate, internal trumpets enclosed with a box ontop. I wasn't going to use the box and fabricate a different plenum, if yuou want i can supply some 4mm ally sheet to fab your own plenum. Has holes for intake air sensor and water temp sensor. Fits under the bonnet in an EA ED falcon. The bloke i bought it of was building a GT40 using some motorbike throttles mounted to the underside, i was going to block it of with some plate and use it as a vacuum source. includes custom 5/8in fuel rails

reason for selling - going to 351w

will look awesome when fitted




Item: Turbos, Manifolds and oil lines
Price: $1500
Type: Part
Condition: New

Description: Good condition T3 turbo's very little shaft play 0.81AR hotside 0.6AR coldside internally gated. Steam pipe exhaust manifolds highmount positon, turbos above rocker covers. Custom made braided oil supply and return.

Same as EBXR8240's original turbo's. Should make an easy 300rwkw




Item: 302w short w/T3 cam, Rollmaster chain
Price: 700
Type: Part
Condition: New

Description: Used 302w Block fitted with T3 cam and new rollmaster chain. Cam and chain worth 400 alone so you get a roller block 300

Item: T3 GT40p heads
Price: 800
Type: Part
Condition: Used

Description: T3 stroker heads. Factory fitted with bigger valves but swapped for stainless valves unsure of brand as i got them with the heads. The heads have been very well ported and have polished chambers, I think they will need valve seats recut, heads have 40thou off so will be awesome for a tough NA 302w.



for more pics on turbo position and the project in general have a look here,

http://s325.photobucket.com/albums/k377 ... 8%20build/