|
Jason_EL |
|
||
Age: 33 Posts: 18 Joined: 26th Nov 2009 Ride: 1997 Ford Falcon GLI Sapphire Location: Sydney |
Hi im not sure if i posted this in the wrong place, didn't think it should be in 6Cyl.
Well i put an EL Ghia dash into my EL Sapphire, everything was working, until around 2 weeks ago. The needle on my speedometer is flickering around as i accelerate. If im going 30km'h the needle bounces between 20 and 40. I was told it could be the speed sensor or a faulty dash, im going to get the motor for the needle replaced this weekend hopefully it will fix it. Does anyone have any idea what it could be. If i posted this in the wrong section please tell me, couldn't decide where it should go.
_________________ |
||
Top | |
BenJ |
|
||
|
It is quite easy to swap the speedo motor from your old dash to the Ghia one. The motor should just pull out, and then push in the new one.
BenJ
_________________ {DESCRIPTION} - Current Ride |
||
Top | |
Jason_EL |
|
||
Age: 33 Posts: 18 Joined: 26th Nov 2009 Ride: 1997 Ford Falcon GLI Sapphire Location: Sydney |
Could that be the reason its ticking around like that though?
_________________ |
||
Top | |
BenJ |
|
||
|
My old EF Fairmont Cluster speedo started sticking at around 80ks, and I swapped in another solenoid from a GLi cluster I had and it worked fine after that.
BenJ
_________________ {DESCRIPTION} - Current Ride |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 13 guests |