|
| slash391 |
|
|||||
|
hi guys
im trying to put a pod filter onto my au fairmont and trying to work out whether to give the air box the flick or put the pod in the box and increase the airflow with a 3'' pipe to a snorkel under the bumper. It has factory fitted gas, and there is a small diameter metal sheathed hose seemingly coming from the gas system to the front of the airbox where the standard snorkel attaches to the box, joined to an elbow inside the box end of the snorkel which points into the airflow. my question is this: wat does it do? (ie do i need it?) i cant see any way to get rid of the box if its an integral part of the gas, thats all.
|
|||||
| Top | |
|||||
| Krytox |
|
|||
|
its a balance pipe for the gas. better off with it.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| slash391 |
|
|||
|
ok cheers.
dya rekon i could just turf the box and attatch the hose further up the intake piping? (ie tb side of the pod) |
|||
| Top | |
|||
| Froudey |
|
||
|
slash391 wrote: ok cheers. dya rekon i could just turf the box and attatch the hose further up the intake piping? (ie tb side of the pod) just return the pod and get a high flow air filter 
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| slash391 |
|
|||
|
could be easier... therefore less fun. ;p
heres wat im thinkin, now i know i prob need this thing; 1. i lose the box, put the pod where it sat and mount the pipe in the stock snorkel that i leave in place. 2. i lose the box, put the pod where it sat and mount the pipe in the induction hose further up from the pod. 3. i keep the box, put the pod inside, leave the pipe where it is and bung another snorkel underneath the bumper to the bottom of the box. 4. mount the pod under the bumper, piss off the stock snorkel and connect the pod to the molding on the box where the snorkel attached. thoughts? |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
why dont you just slip in a k and n panel filter and use a BA turbo snorkel. looks better is easier to do and you will probably get the same performance.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
93EB wrote: why dont you just slip in a k and n panel filter and use a BA turbo snorkel. looks better is easier to do and you will probably get the same performance. and get an EF lid for the box and run a short section of 3 pipe from the box to the flex elbow AND read this ford-4l-and-6-cylinder-f1/guide-to-ford-6cyl-updated-weekly-t83794.html 4th heading from the top and you'll soon owrk out why we are telling you not to use the pod. There is also the article from autospeed where they flow tested a bunch of air boexes, that will explain why people tell you to use the EF lid. |
||
| Top | |
||
| ford-racer46 |
|
|||
|
Does any one think its better to rig a pod in the standard box or a K&N filter or whats the best flow on an EB falcon i cant find COI's
_________________ Now, I've got a message for all the other drivers out there. If you smell a delicious, crispy smell after the race, it's not your tailpipe. It's just a little of Shake...and Bake! |
|||
| Top | |
|||
| slash391 |
|
|||
|
i figure that not enuff air gets into the standard box for the pod to do any good so iv opened mine out underneath.
|
|||
| Top | |
|||
| xfpaul |
|
||
|
its a balance pipe to the gas converter, it see's ram air as the car moves forward and applys the same pressure to the back of the diaphram in the converter, as so the car does not stall out under decell at traffic lights etc. air being pushed in through the mixer ring but the throtles closed = too much gas= stall out
_________________ NC2 Fairlane AU2 Intech 4.0 Wolf V500 ECU Accel 500cc Injectors Eaton M90 Blower MPx Porting 75mm Mustang TB Intercooler Holley 255lph EL XR6 Rear End 3.45 LSD Duel Fuel lots more. |
||
| Top | |
||
| slash391 |
|
|||
|
so as long as its in the airflow it dont matter where it is?
|
|||
| Top | |
|||
| bushman |
|
|||
|
Dude i know your 17 but stop being a gay f**k and just buy a K and N panel filter you might think your fully hectic saas pod is FULLY SICK BROOOOOOOOO but its s**t when i was 18 i wanted one too and i got one as well, but i made an adapter to to go on my el and its still there to this day mainly because i cbf spending another $150 on the s**t tank, pod filters should only be used on turbo cars because its the only place they look half decent. Rant over.
_________________ THE LOOSEST MUTHA FUKA YOU'VE EVER MET |
|||
| Top | |
|||
| slash391 |
|
|||
|
suck a d**k
i was askin wheter i needed that pipe, not for your opinion on pod filters. |
|||
| Top | |
|||
| sooty72 |
|
|||
|
slash391 wrote: suck a d**k . BAAHAAHAAHAAHAA You just got "told" 
_________________ Yes, I own a Ute. No, I won't help you move! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 123 guests |
