|
| kiwisxr6 |
|
|||
|
I have a 1999 AU XR6; I would like to know if it were possible to change the centre of the Dash where the stereo is located, to the later Series II or III layout? I know it means changing all the control knobs for the vent, heating and air con controls etc, but can it be done without too much drama?
Cheers. |
|||
| Top | |
|||
| Kenay |
|
|||
|
as long as you arnt talking about putting a fairmont 1 in then i cant see why it would work ... dont they all have the egg in the middle
|
|||
| Top | |
|||
| fourL6 |
|
|||
|
{USERNAME} wrote: as long as you arnt talking about putting a fairmont 1 in then i cant see why it would work ... dont they all have the egg in the middle wrong...  the heater box is different, so you would have to pull the dash out and exchange the heaterbox(the get it re gassed, then i assume the dash wiring is different so you might as well put a fairmont dash in with requires the same amount of work... Cheers Cam
_________________ Was - {DESCRIPTION} |
|||
| Top | |
|||
| kiwisxr6 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: as long as you arnt talking about putting a fairmont 1 in then i cant see why it would work ... dont they all have the egg in the middle wrong... the heater box is different, so you would have to pull the dash out and exchange the heaterbox(the get it re gassed, then i assume the dash wiring is different so you might as well put a fairmont dash in with requires the same amount of work... Cheers Cam LOL your right, I think it best to replace with a Fairmont Dash...I must admit, I really hate the EGG Shape...it does have that Taurus feeling to it high?! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 67 guests |
