|
| jordancoe |
|
||
|
hi guys im looking at getting my engine reconditioned im my ed and was wondering roughly how much it might cost. im also looking at getting a wade cam put it while its getting done. do u have to upgrade anything else to put a performance cam in ?
|
||
| Top | |
||
| taxi 5L |
|
||
|
I'd put some better springs in and get some headwork done while its getting done too...
phill |
||
| Top | |
||
| jordancoe |
|
||
|
but how much extra would that cost
|
||
| Top | |
||
| taxi 5L |
|
||
|
Is someone in newy doing the reco ? i dont think springs would be over $150 and depends how much porting you get done to the costs...
phill |
||
| Top | |
||
| jordancoe |
|
||
|
i dnt no where im gunna get it done yet iv only recently moved down here, anyone ud recomend. theres a mechanic out here in the bay i was gunna ask coz iv been to him a few times for different things and he seems like a decent guy
|
||
| Top | |
||
| taxi 5L |
|
||
|
theres a few place's up here,at work we get all our machine work and heads done at HB sales and we reassemble them but just have a look in the phone book and get some price's.Are you taking the motor out or you dropping it off and picking it back when done..
phill |
||
| Top | |
||
| jordancoe |
|
||
|
im not sure i just assumed theyed have the car until its done and do it wateva way they wanted. but yea ill have a look tomorow and make a few calls on my lunch break
|
||
| Top | |
||
| cjh |
|
|||
|
Rough guess for what you want done ( port & polish, cam & v/springs + vernier ).....$5,000 to $6,000.....thats drop the car off, pick it up when finished.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| phillyc |
|
||
|
Maybe think about an AU motor into the ED instead?!
If you kept your current motor and got them to rebuild it, an ACL rebuild kit is about $800. Get them to use an AU metal headgasket ($100) which will save you grief down the track. A camshaft - brand new billet - will be about $400-600. Regrinding a standard cam into something a little more lift = airflow = potential power/torque costs $150-$250. New performance valve springs are about $150 for Crow (Ebay price) Vernier timing gear is $180ish (Ebay price) If you go the porting it will start at a few hundred at least. 'Pocket' porting gets the most bang for buck. Maybe a good start might be just get a 3 angle valve (seat) job which will cost about $250. I've rang a few around Newcastle recently. HB sales didn't sound interested and were a bit exxy for the valvework. To all that add labour. How much can you do yourself? |
||
| Top | |
||
| jordancoe |
|
||
|
i wouldnt really be able to do any of it my self as i am just learning and can only do basic things atm, how much would labour cost
|
||
| Top | |
||
| phongus |
|
|||
|
jordancoe wrote: i wouldnt really be able to do any of it my self as i am just learning and can only do basic things atm, how much would labour cost I thought the same thing. Spent some money on tools and did majority of my mods myself do to money constraints...best learning curve ever. If in doubt, buy a second engine and work on that. At least if you fail, you would have learned from your mistake...however if all goes well, you're ahead.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| MadMatt |
|
|||
|
Buy a low km AU motor and cam to suit.
inc fitting you are looking at $1,000 to $1,500.
_________________ Member Number 8804 |
|||
| Top | |
|||
| cjh |
|
|||
|
MadMatt wrote: Buy a low km AU motor and cam to suit. inc fitting you are looking at $1,000 to $1,500. Up here the wreckers want $1250 just for an AU engine.....then + + + after that.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| BenJ |
|
||
|
You can get AU engines here in Sydney for as little as $150, with quite low kays, say under 150k.
You can then install it yourself, along with a BBM conversion for well under $500. No need to rebuild at all. Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| FORDom |
|
||
|
i bought a au motor complete for 175 with 55 000 km's about 3 years ago.. i rebuilt it anyway myself and its the best thing i ever did. a shop manual + search on fordmods and u will be able to do it yourself.. set me back about 4k all up but thats to performance spec..basic rebuild yourself about 2k.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
