My fuel pump is no longer starting with the car since Ive been screwing around with the alarm and half taken it out, so it no longer primes, which obviousely means the car wont start and im not getting any fuel at the motor. I want to hook power straight into the fuel pump voltage lines to make sure the pump itself hasnt died, these run along the floor of the cabin dont they? And what wires provide voltage for the pump to turn on and is it 12v or 3v? Thanks,

there is a black/yellow 12v wire that runs with the loom from the fuel pump down the drivers side of the car under the carpet up into the engine bay loom to the relay..

if you have just removed an alarm it probably interupted the trigger wire from the ecu to the relay

Cheers mate Ill give that a try next time Im with it.