Wanted a turbo kit for a E series motor no need for inter cooler or Bov just turbo/exh manifold/dump pipe/oil/water lines anybody got something like this laying around also i can pick up if needed within any state except TAS im interested and if you have pictures of part would be great thanks

ive got a snort stage 2 kit,stainless tuned length manifold externally gated,garrett t04e,3 inch dump,3 inch custom hi flow cat,3 inch cat back to behind diff,2 1/2 inch cooler pipes (alloy in engine bay,mild steel behind bar) oil feed,oil drain,and tee peice,4 inch intake pipe(no filter) reco power steer pump with modded housing to fit 4" intake past,vacuum manifold,turbo smart boost tee,oil catch can,wolf 3d v4 ecu with hand controller,modified dizzy for wolf(hall effect sensor moved),2x ignitors (1 is a spare),seimens 760cc injectors,walbro 255lph intank fuel pump. i think thats everything,all you might need 1 or 2 silicone joiners for cooler pipes (i think a couple got torn) and some vacuum hose,an air filter and a cooler.
asking $4500 pick up in vic.everything was new when i got it,and has done about 15000kms,oil changed in engine every 4-5000kms.never had a problem with anything. the ecu is tuned for this setup,but not sure of the power it made,it went well,i ran 12 psi on a stock au engine.