|
| maca_404 |
|
||
|
Hi just fitted some au intake piping in to my eb all is good except just before the intake meets the manifold there is a spot for a hose to go on and I dont know where it is supposed to go. Just wondering if someone could give me an idea.
Thanks |
||
| Top | |
||
| TROYMAN |
|
||
|
when you say eb and your fitting an au intake i assume you have a broadband manifold??
is it a small 3/4 hose?? if so its for the rear rocker cover breather.. au have the breather on the intake pipe instead of the bottom of the throttle body... |
||
| Top | |
||
| maca_404 |
|
||
|
I see so just block it off I guess ??
|
||
| Top | |
||
| BenJ |
|
||
|
maca_404 wrote: I see so just block it off I guess ?? Yep. I used a bolt with some silicon on the thread. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| maca_404 |
|
||
|
Awesome - Thanks Again
|
||
| Top | |
||
| MadMatt |
|
|||
|
I have a AU intake on my EF.
Being dual fuel, the breather is connected there and plugged at the throttle body.
_________________ Member Number 8804 |
|||
| Top | |
|||
| maca_404 |
|
||
|
Well it did considering I had no intake at all lol ? I only just put the au engine in the eb not long ago so still getting it all together
|
||
| Top | |
||
| maca_404 |
|
||
|
Nope, But I was glad all just bolted straight in no need for mods. Car is a lot more fun now with the new motor and j3 chip etc
|
||
| Top | |
||
| snap0964 |
|
|||
|
MadMatt wrote: I have a AU intake on my EF. That's how I set mine up for LPG injection - BUT, If there's a mixer in the line, make sure the join is on the aircleaner side of the mixer.
Being dual fuel, the breather is connected there and plugged at the throttle body.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
