Fordmods Logo

EL Headlights Discoloring 

 

Page 1 of 1 [ 12 posts ] 

 
 Post subject: EL Headlights Discoloring
Posted: Sun Nov 14, 2004 6:21 pm 
Fordmods Newbie
Offline

Age: 41

Posts: 12

Joined: 14th Nov 2004

Location: adeliade
SA, Australia

Does anyone know the cause of EL headlights turning yellow? Is it dirt or just cheap plastic? it seems also that you would have to pull the whole front bumber off just to pull lens off.
Top
 Profile  
 
 
Posted: Sun Nov 14, 2004 6:29 pm 
Tyre Shredder
Offline

Age: 57

Posts: 387

Joined: 5th Nov 2004

Location: Canberra
ACT, Australia

Welcome to EF/EL headlights, common prob, plenty of threads about this, someone just used Brasso to do his, there used to be a doco on this before i think. The crap is on the outside of lens, can also be sand papered off.

 

_________________

GET STUFFED

Top
 Profile  
 
 
Posted: Sun Nov 14, 2004 6:39 pm 
Stock as a Rock
Offline
User avatar

Age: 40

Posts: 107

Joined: 8th Nov 2004

Gallery: 1 images

Ride: EF II Fairmont

Location: Perth
WA, Australia

Yep just sand it off with something fine (1200 or 2000 grade seems to be the norm), then a bit of cut and polish and should be okay. Result depends on how much time you spend doing it.

There is also a few other plastic polishing products like Plexus or Brasso like bombed said, these also do a fairly decent job. I used kitten cut and polish #3 on mine with 1500 grade sandpaper and after about 6 or 7 applications it has turned out pretty good. It still has a bit of cloudyness to it but no way is it as bad as it was, so am happy with it.

Hope that helps. :)

 

_________________

-charzar.

1995 EF II Fairmont
30mm lowered Lovell's springs and KYB shocks
AU XR8 snorkel

Top
 Profile  
 
 
Posted: Sun Nov 14, 2004 7:00 pm 
Fordmods Newbie
Offline

Age: 41

Posts: 12

Joined: 14th Nov 2004

Location: adeliade
SA, Australia

Thanks, I thought i was inside. Ive just been out trying window cleaning which is working to an extent. Do you mean Brasso Metal polish or is there brasso plastic polish. ill get some fine sand paper tomorrow and give it a shot. What causes the yellowness? if its on the outside,
Top
 Profile  
 
 
Posted: Sun Nov 14, 2004 9:18 pm 
Stock as a Rock
Offline
User avatar

Age: 36

Posts: 114

Joined: 5th Nov 2004

Gallery: 10 images

Ride: BA MkII

Location: perth
WA, Australia

the headlights cause rainwater to dry too quickly on the lens, which causes the yellowing. I did mine a few months back, polished them with toothpaste then buffed out the cloudyness with a buffer and meguires scratch x.

goodluck mate

 

_________________

mullets are cool.... they promote the quintessential iconic figure of an australian
Fordmods Member #61

1. 95 Ford Falcon EFII
2. 98 Nissan Pathfinder Ti
3. 04 Ford Falcon BA MkII

Top
 Profile  
 
 
Posted: Sun Nov 14, 2004 9:24 pm 
Fordmods Newbie
Offline

Age: 41

Posts: 12

Joined: 14th Nov 2004

Location: adeliade
SA, Australia

with toothpaste? ok... Well I will try anything, i got all the yellow out with 5star window spray cleaner, but still some cloudy blobs will try that scratch x stuff u mentioned.
Top
 Profile  
 
 
Posted: Mon Nov 15, 2004 7:25 am 
Getting Side Ways
Offline
User avatar

Age: 54

Posts: 1826

Joined: 6th Nov 2004

Gallery: 3 images

Ride: 1997 Falcon EL Gli/Sleeper

Location: Bayside, Brisbane
QLD, Australia

Please read this Topic for more info on this problem:

http://www.fordmods.com/phpBB2/viewtopic.php?t=223

 

_________________

" In life their is never an Obligation just an Opportunity to..Own an awesome 1970 Ford Mach 1 Mustang! "

Top
 Profile  
 
 
Posted: Tue Nov 16, 2004 1:28 pm 
Stock as a Rock
Offline
User avatar

Age: 47

Posts: 119

Joined: 15th Nov 2004

Location: Bundaberg
QLD, Australia

Have you found that the light output is not as good when they are yellow and has it inproved when they are cleaned.
Top
 Profile  
 
 
Posted: Tue Nov 16, 2004 6:19 pm 
Fordmods Newbie
Offline

Age: 41

Posts: 12

Joined: 14th Nov 2004

Location: adeliade
SA, Australia

my lights are yellow as f**k, i have to use highbeam when theres no street lights, i cleaned bout 50% of s**t off yesterday and work heaps better.
Top
 Profile  
 
 
Posted: Wed Nov 17, 2004 3:43 am 
Smokin em up
Offline
User avatar

Age: 39

Posts: 206

Joined: 5th Nov 2004

Gallery: 10 images

Ride: EF Falcon

Location: Perth
WA, Australia

this same topic is in the exterior modifications forum

I had the same problem and tried everything! i got em looking good for a while but they just went back to the way they were if not worse.
i rang my local FORD service department at NUFORD, and they actually fix the discolouration there. They scraped of the yellow cloudy layers with a machine i think and promise that they will never discolour again.

It only cost me $40 and they look brand new, and that was 2 years ago and they still look great.

I recomend getting this done, just call your local FORD Service Department. It works and its a s*it load cheaper than replacing them.

 

_________________

6 IN A ROW, THE WAY TO GO


- Lukey 2.5' Sports Exhaust, Genie Extractors, High flow Cat
- 18 grade tint
- King Spring Super Lows
- Plates (BONO'S)
- Neon Blue Dash
- Sony 350W 4 ways, Sony 900W Subs x 2, Sony MP3 Deck xls-3300, Boss 1000W 4 channel Amp
- 17" HP Racing - Design Rims

Top
 Profile  
 
 
Posted: Wed Nov 17, 2004 7:53 am 
Getting Side Ways
Offline
User avatar

Age: 54

Posts: 1826

Joined: 6th Nov 2004

Gallery: 3 images

Ride: 1997 Falcon EL Gli/Sleeper

Location: Bayside, Brisbane
QLD, Australia

1 SLY 97EL wrote:
Please read this Topic for more info on this problem:

http://www.fordmods.com/phpBB2/viewtopic.php?t=223


Like I said please go to this original link on this topic as it has more in depth info and hints on how to get rid of the yellowing.

 

_________________

" In life their is never an Obligation just an Opportunity to..Own an awesome 1970 Ford Mach 1 Mustang! "

Top
 Profile  
 
 
 Post subject: color
Posted: Wed Nov 17, 2004 9:52 pm 
Fordmods Newbie
Offline

Age: 41

Posts: 12

Joined: 14th Nov 2004

Location: adeliade
SA, Australia

40 dollars, not too bad coming from dealer. I managed to get all the s**t off by using wet and dry, which was mentioned on the orginal post. looks like new again. Thanks for advice.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 12 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 49 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 7:10 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names