|
| ef_falcon_95 |
|
|||
|
heyy i hav an ef falcon. its a column auto nd i wanna convert it 2 auto on the floor .. does any1 know the steps involved... im new 2 all this lol
_________________ El XR6 Turbo |
|||
| Top | |
|||
| BenJ |
|
||
|
You will have to get some bucket seats.
You may have to weld in the EF/EL seat pan to the floor. You will have to source the Gear Box Shifter hump for the tunnel, cut out the correct hole and weld in the hump. Source the shifter assembly, and any associated brackets etc. Source an normal steering column as it is adjustable. Probably will need the correct carpet and floor console pieces etc. That is all I can think of off the top of my head. Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| sd1800 |
|
||
|
BenJ wrote: You will have to get some bucket seats. You may have to weld in the EF/EL seat pan to the floor. You will have to source the Gear Box Shifter hump for the tunnel, cut out the correct hole and weld in the hump. Source the shifter assembly, and any associated brackets etc. Source an normal steering column as it is adjustable. Probably will need the correct carpet and floor console pieces etc. That is all I can think of off the top of my head. Cheers BenJ Jesus I didn't realise it was such a big job. I think column auto is kind of cool in a old school gimmick kind of way 
_________________ Formerly LV XR5 Turbo, AU Fairmont Ghia V8 & EBII Fairmont I6. |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
yer i changed it 2 auto on the floor it was quite easy.. i had to cut out the housing for the shifter and cut a hole in my car and used tek screws to hold it down..i also got seats, centre console and carpet turned out good ... thanks for ur help...... corey
_________________ El XR6 Turbo |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 104 guests |
