Fordmods Logo

Fitting extractors 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: Fitting extractors
Posted: Sat Jan 30, 2010 9:52 pm 
Oompa Loompa
Offline

Age: 35

Posts: 20

Joined: 4th Jul 2009

Ride: 06 bf mkii xr6t

Location: collie
WA, Australia

hey guys how hafrd is it to fit 4499 pacemaker extractors to a stock el if any one has a te ch doc or pics on it i would muchly appreciate it

andrew
Top
 Profile  
 
 
 Post subject: Re: Fitting extractors
Posted: Sun Jan 31, 2010 12:43 am 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

Hi Andrew.

If you can't weld, then this is not a DIY job.

It is easy to bolt the headers on to the head, but then you need to cut the Cat pipe shorter, weld on a flange to mate with the end of the Pacies.

You could take them to an exhaust shop, and ask how much to fit the whole lot, and then ask how much to just to the welding part, if you fit the pipes etc.

Cheers
BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
 Post subject: Re: Fitting extractors
Posted: Sun Jan 31, 2010 12:51 am 
Oompa Loompa
Offline

Age: 35

Posts: 20

Joined: 4th Jul 2009

Ride: 06 bf mkii xr6t

Location: collie
WA, Australia

ok well it comes with a ans cat and i just rembered its got a sports exuast that my dad put on while i was working away lol will that make any diffrence
Top
 Profile  
 
 
 Post subject: Re: Fitting extractors
Posted: Sun Jan 31, 2010 1:06 am 
Getting Side Ways
Offline
User avatar

Posts: 807

Joined: 28th Oct 2008

Location: melburn
VIC, Australia

yep, if it has a cat, that means it will already have a flange welded on the extractors.
but unless the car has a pipe that extends to where the standard cat would normaly end, you will need a pipe made up to go between the cat on the new extractors and the start of the cat back exchaust.

but if the new extractors have a cat that joins up to a normal cat back exhaust, you would be able to bolt it all up at home.

 

_________________

XG Panelvan
mild engine, EL ECU & J3, HI6 & MSD coil

in the shed - .595" lift cam, GT4202, forged AU engine, ems 4424 ecu, glide & 5500 stall - next-bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU, J3 chip, wideband & logger, ported BBM, 3" intake

Top
 Profile  
 
 
 Post subject: Re: Fitting extractors
Posted: Sun Jan 31, 2010 10:39 am 
Getting Side Ways
Offline
User avatar

Posts: 887

Joined: 8th Aug 2006

Ride: Falcon

Location: Central Highlands
QLD, Australia

do a search of the pacemaker website for fitting instructions of the 4499's headers.

cheers and have a nice day;.....................................................

 

_________________

97 EL Fairmont 4l OHC .Silver.
Exhaust: Pacemaker's, 2.5" exhaust and Hiflow cat
Intake: FRAM AIRHOG , EL GT snorkel
XR6 300kpa fuel reg Stg 2 Auto Shift Kit.6DJA ECU
PM in Qld looking too buy Toyota 4*4 SR5 Dualcab Hilux 91-97 with 2.8l diesel engine/5spd manual

Top
 Profile  
 
 
 Post subject: Re: Fitting extractors
Posted: Sun Jan 31, 2010 8:11 pm 
Stock as a Rock
Offline
User avatar

Age: 37

Posts: 159

Joined: 13th Dec 2008

Gallery: 1 images

Ride: AU Wagon/ 1967 XR

Location: Melb East
VIC, Australia

Id just take the cat to a exhaust shop and ask them to fit it for you, usually can get a full cat back exhaust supplied and fitted for under 300 bucks so i cant imagine it would be that expensive for them to just weld the flanges on the end and fit it for you while its on the hoist.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 140 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 3:54 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names