|
| XHII V8S |
|
||
|
How is the handbrake adjusted on a XH ute? Do you have to take the rear discs off or can it be adjusted from the cable? Thanks for the help
_________________ Pacies & single 2.5'. New manifold to come soon... |
||
| Top | |
||
| snap0964 |
|
|||
|
Cable - same as EA/EB/ED.
If you've replaced rear pads, you'll need to reset the rear caliper pistons.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| supadan808 |
|
||
|
hey sorry for hijaking your thred
just wonding how to compress the piston on a XH panelvans rear brakes so i can fit new pads. thanks heaps |
||
| Top | |
||
| XHII V8S |
|
||
|
A good quality c or g clamp with do they trick. Just wind the clamp up and the piston should compress
_________________ Pacies & single 2.5'. New manifold to come soon... |
||
| Top | |
||
| sooty72 |
|
|||
|
That works on the front calipers, but the rear ones on my ute had to be pushed/threaded back using a special tool/socket. Have a look in the Gregory's service book, it shows how to do it properly. The tool/socket is available from Repco or SuperCrap.
I would get a gregorys/haynes book first and go from there. Good luck. 
_________________ Yes, I own a Ute. No, I won't help you move! |
|||
| Top | |
|||
| supadan808 |
|
||
|
thatnks heaps guy one off my dads mate told us how and its all good now onto the next side
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 95 guests |
