|
| 87SIlude |
|
||
|
Something in my engine bay. Might even be in my engine knocks under load. But I can only hear it through the passenger window.
Any ideas |
||
| Top | |
||
| Shortshift |
|
|||
|
Could be a worn ball joint, a broken rocker arm, noisy lifter, or coming from the power steering rack.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| 87SIlude |
|
||
|
How do I go about checking a rocker arm? Just take the rocker cover off?
I think its something in the suspension area tho... |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
a shock bolt loose or a worn shocky rubber
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| Shortshift |
|
|||
|
I'd check the suspension first before taking the rocker cover off.
If you jack the front left side up, you can grab hold of the wheel (parallel with the ground) and try moving it left to right to check the tie rod for wear. If you move the suspension up and down with a lever under the wheel (like a bit of thick timber), you can check if the lower ball joint has any play. Worn wheels bearings may also be the cause of movement. And prop the car up on vehicle stand for safety. Wouldn't like to hear you got squashed. Do a visual inspection of the bushes on the front as well.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| Shortshift |
|
|||
|
As EDXR6-poly mentioned, a worn shock. Just bounce the front up and down to see it makes any noise topping out, or if it seems spongy.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Maybe a broken engine mount.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| SV-Valiant |
|
||
|
maybe the neighbours cat wanting out
|
||
| Top | |
||
| SV-Valiant |
|
||
|
check your upper control arms for bush wear mine had a noise coming from the front I couldnt figure out till i jacked it up and found one worn bush?
|
||
| Top | |
||
| Johnson stroker |
|
|||
|
upper control arm bushes perish, the metal through the middle of it collides with the bracket, good chance thats what you are hearing. Passenger side always seams to go first.
_________________
|
|||
| Top | |
|||
| SV-Valiant |
|
||
|
Yeah mine was the passenger's side same with the shockie it just went as well so just replaced both and the drivers side bottom bolt was seized had to use angle grinder to cut the shockie off
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot], willams and 131 guests |
