|
| IamSteve |
|
||
|
if i was to shave 15 thous off the head would i have trouble with a stage 3 crow cam or a cam that has a high lobe,
_________________ OMG DOSE IT ULAY |
||
| Top | |
||
| paulos |
|
||
|
a stroker kit u mean ???
15thou is almost un noticable
_________________ God made s**t, Holden put wheels on it |
||
| Top | |
||
| TROYMAN |
|
||
|
IamSteve wrote: if i was to shave 15 thous off the head would i have trouble with a stage 3 crow cam or a cam that has a high lobe, 10-15 thou is pretty much a std skim, so its not much. and a high lift cam wont normally give you problems with shaving the head.. paulos wrote: a stroker kit u mean ??? 15thou is almost un noticable he is talking about cam lobe lift..  a stroker has nothing to do with the cam or head. a stroker kit is all bottom end as in crank,rods and piston height.. |
||
| Top | |
||
| paulos |
|
||
|
haha i just saw high lobe and thought of the crank shaft
_________________ God made s**t, Holden put wheels on it |
||
| Top | |
||
| IamSteve |
|
||
|
lol a paulos... yer anyway so 15 thous wont do s**t....mmmm well 30 thou? too much?.. btw what is the standard ef falcon gli compression?
_________________ OMG DOSE IT ULAY |
||
| Top | |
||
| TROYMAN |
|
||
|
std ef compression is 9.3:1
|
||
| Top | |
||
| IamSteve |
|
||
|
yer ok thx to all that have help
_________________ OMG DOSE IT ULAY |
||
| Top | |
||
| krisisdog |
|
|||
|
Shave 30 thou off and use an AU MLS gasket, which is 20thou (std is 40thou), so total is 50thou off, compression will be a touch under 10:1. Much more and you get issues with timing chain slack.
What cam are you looking at? Wade and Camtech list some pretty decent grinds, and you can access all the specs online. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot], willams and 136 guests |
