|
| zbm |
|
||
|
Hello all, I have a AUII VCT ute and the solonoid is leaking oil. I don't have a manual that gives clear diagrams of what is there ie seals etc. Anyone able to point me in the right direction?
zbm |
||
| Top | |
||
| TROYMAN |
|
||
|
where abouts is it leaking from??
is it leaking from the plug on the solinoid?? if so ,its not servicable and the solinoid will need to be replaced... |
||
| Top | |
||
| Mr220kw |
|
|||
|
G'day
Just check that it is leaking from there and not from the VCT idler pulley underneath. If the seal on the idler is leaking it tends to throw a bit of oil around and this might give the impression that the solenoid is leaking. If it is the solenoid your up for $265. Cheers Mr220kw |
|||
| Top | |
|||
| zbm |
|
||
|
Thanks guys, I am sure it is leaking from the plug or connector end. Does this baby unscrew easily without removing the rocker cover and vct unit itself?
|
||
| Top | |
||
| TROYMAN |
|
||
|
afaik it screws in and i think there is a brass or copper washer sealing it
|
||
| Top | |
||
| Mr220kw |
|
|||
|
Just disconnect the plug by removing the circlip and then unscrew. There is a rubber washer seal on the unit. New one just screws straight in.
Cheers Mr220kw 
|
|||
| Top | |
|||
| zbm |
|
||
|
Thank you all for your help. I will get stuck into this asap and post a follow up when its done.
regards zbm |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 98 guests |
