|
| milo 302 |
|
||
|
Im after the big end and main cap torque specs for a ho engine, both of my books have different specs.
Does 30-35 nm for the big ends and 90 nm for the mains sound right, or does 45 ftlb for big ends and 105ftlb for the mains sound right  The first specs are from max ellerys and the second are from how to rebuild a ford smallblock. Cheers Milo |
||
| Top | |
||
| xp221 |
|
||
|
30nm for the big end and mains are 90nm. that straight from a factory workshop manual
|
||
| Top | |
||
| milo 302 |
|
||
|
Cheers mate, i had to ask because there is a big difference in the american specs and the australian by the looks of it
May have to go see my machinist to be on the safe side though 
|
||
| Top | |
||
| XR9UTE |
|
||
|
How to rebuild your smallblock ford says; " 95-105ft lbs for the 351 and 60-70ft lbs for the others"
A 302 is "the others" For rods; 19-24ft lbs for 221,260,289,and 302 engines and 40-45ft lbs for the HP289, Boss 302 and 351W" So there is no difference in the specs between books. |
||
| Top | |
||
| milo 302 |
|
||
|
My book is printed wrong then and these are the only specs i can find on the internet as well.
The book is called"how to rebuild the smallblock ford"by george reid- workshop bench series. Have a look see Im pretty sure my motor is a 302 ho{DESCRIPTION} |
||
| Top | |
||
| XR9UTE |
|
||
|
Just follow the 289/302 specs. The f**k wits put 302HO with the 351.
|
||
| Top | |
||
| milo 302 |
|
||
|
Cheers.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |