|
| willba79ax8 |
|
||
|
hey guys was doing this up this after noon and the head of the plastic bolt snapped off on me
 the rest of it is still in the hole although it is drip leaking without the rubber washer. How would i go about removing the rest of the bolt and where can i get another drain plug ? Thanks for your help ! Will |
||
| Top | |
||
| ToranaGuy |
|
|||
|
willba79ax8 wrote: hey guys was doing this up this after noon and the head of the plastic bolt snapped off on me the rest of it is still in the hole although it is drip leaking without the rubber washer. How would i go about removing the rest of the bolt and where can i get another drain plug ? Thanks for your help ! Will Drill a little hole in it & use a small easy out to remove it. Probably need to pick another up from a radiator joint or a wreckers. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| misk_one |
|
|||
|
theres a drain plug on the radiator?
_________________ XG Panelvan |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
misk_one wrote: theres a drain plug on the radiator? Yeah, some of them do have drain plugs. I have also seen after market ones that don't have them as well. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
There is a drain plug on the bottom but ive been advised by a radiator joint never to disturb it because of the problems your facing. next time its easier just to undo the bottom hose to flush or drain it.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
Go and by a reverse drill bit and drill that through it, chances are it will pick up and unscrew it for you.
|
||
| Top | |
||
| nalane |
|
|||
|
Hammer a blade screwdriver through it and unscrew it. Find a bolt with the same thread on it and put it in with a bit of teflon tape around it.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 71 guests |
